Rangefinder cam for 90mm lens on Super Speed Graphic

[george_verbryck]

I have a Super Speed Graphic and would like to use the rangefinder

with the 90mm lens I have. I have looked high and low with no result

to find a picture or diagram of one but to no avail. If someone out

there has one and I could mail post card that you could trace the cam

for me so that I would have a starting point to make a new one or if

you know a source where I can locate one it would be greatly

appreciated. Cheers George

[graflite]

Hi George...

 

You might have a look at this page from the Graflex.Org website; it doesn't expressly talk about making 90mm cams, but you could also ask about one on the Help Forum that is set up on that site.

 

http://www.graflex.org/articles/cave.html

 

Also if you do a site search on Graflex.Org you could get the phone# for Mr. Fred Lustig in Reno,NV. He bought out all the stock of parts (that originally came from WD Service when they went out of business) that were sold by Midwest Photo Exchange in the mid-1990's. Fred has had some health concerns for the past 6-8 months but he may be able to sell you what you want if he has any.

 

Hope this helps!!!

[tim_atherton9]

I have one (originally from Fred a few years ago).

 

If I can find it I'll scan it beside a ruler - if you can give me an email where I can send the file.

 

tim a

[george_verbryck]

Tim thanks a bunch if you ever want to sell let me know in the mean time my email is verbryckjack*@*aol*.*com just remove the asterisks and thanks again. Cheers George

[tim_atherton9]

actually, I'll see if it will upload - compressed quite a bit

 

it's about 0.8 to 1mm thick. Scan shows both sides. The top lef corner of the top side is chamfered

[tim_atherton9]

Here's a 1:1 scan of the P80 cam 206.5mm (nominal 210mm - depends on the "actual" focal length of your 210mm lens)