ed_pierce2 Posted September 12, 2003 Share Posted September 12, 2003 Please forgive my laziness; I really don't want to spend hours learning about scanning and researching various models. I know very little about digital stuff. I'm looking for a scanner which will scan 4x5 negatives as well as 8x10 prints. The scans will be used for the web and email only...no high quality printing. However, I would like the pictures on my future web page to look as good as possible, so I'm guessing that scanning my 4x5 negs will be the way to go. These four models are offered with the new system I'm looking at from Dell. Which would you choose, or something else? 1) Epson Perfection 1670 Photo Scanner 2) Visioneer 9220 Flatbed Scanner 3) Canon Lide30 4) Visioneer 9020 Flatbed Scanner Thanks Link to comment Share on other sites More sharing options...
brian_kennedy Posted September 12, 2003 Share Posted September 12, 2003 The Epson 3200 (around $400) and 2450 (around $???, less than $400) are the two most often recommended around here for reasonably priced, high-quality scans of MF and 4x5. They might provide a little bit better scan than you need, but I can vouch for the fact that they are very good for the price. I use a 3200. Make sure the scanner you choose can scan 4x5 transparencies. Many flatbed "photo" scanners (i.e., one with a diffuse light built into the lid for scanning transparencies) don't have a large enough transparency area to scan 4x5 -- i.e., they can scan 35mm strips, but not anything larger. Link to comment Share on other sites More sharing options...
don_miller2 Posted September 12, 2003 Share Posted September 12, 2003 Hi Ed, For your requirements, definitely the Epson 3200. The Canon 9900F would be my second choice. Look here for a review of both: http://www.photo-i.co.uk/ Note that the 3200 is at two different price points depending on the software bundle (at least in the U.S.). Don Link to comment Share on other sites More sharing options...
jim h1664876971 Posted September 12, 2003 Share Posted September 12, 2003 Epson 3200; cheap and good. Link to comment Share on other sites More sharing options...
norris_lam Posted September 12, 2003 Share Posted September 12, 2003 I've been using Epson 2450 for quite a long time for scaning my 4x5 slides. It has a very little bias towards red. Its speed is fast and the film holder is good enough to avoid any Newton ring. Comparing to Microtek film scanner which scan film without going thru the glass, Epson is only half of its price and should very much exceed your need and expectation. Link to comment Share on other sites More sharing options...
scott_soper Posted September 12, 2003 Share Posted September 12, 2003 I'd go with the Epson also: quick, easy, gets the job done! Link to comment Share on other sites More sharing options...
jbq Posted September 12, 2003 Share Posted September 12, 2003 Epson 3200 for $400. Epson 2450 if you are really trying to squeeze a few bucks. Those peak around 1800dpi. If you really want extra detail, a good Microtek with a glassless holder with get you 2500dpi, but that's more expensive. Link to comment Share on other sites More sharing options...
jon_shiu Posted September 12, 2003 Share Posted September 12, 2003 Hi, if you have good 8x10 prints from the 4x5 negs, I would just scan those and skip neg scanning. A suitable scanner for prints might be around $100. Link to comment Share on other sites More sharing options...
ed_pierce2 Posted September 12, 2003 Author Share Posted September 12, 2003 Thanks all. There's a bunch of refurbished 2450's out there for under $250. Cool! Link to comment Share on other sites More sharing options...
brian_ellis3 Posted September 12, 2003 Share Posted September 12, 2003 He said he wants to scan 8x10 prints. I didn't think the 2450 and the 3200 could scan 8x10 prints but then I don't own one so I have no personal knowledge. I just assumed that since they can't scan 8x10 negatives they also can't scan 8x10 prints. Seems a little odd that they can scan one but not the other but then lots of things about digital seem a little odd to me. For web work you're better off IMHO scanning your 8x10 prints rather than the negatives. The quality difference between scanning negatives and scanning prints won't show up on the web and you presumably already have the prints in final form, whereas if you used the negatives you'd have to emulate the burning, dodging, etc. work you did in making the prints. Link to comment Share on other sites More sharing options...
ralph_barker Posted September 12, 2003 Share Posted September 12, 2003 The Epson Perfection 3200 and earlier 2450 scan 8x10 prints (or documents to A4 size), and have a narrow transparency adapter that measures about 4.5x11 in the relatively thin lid for negs and trannies. Earlier Epson Expression Pro models had a much thicker, full-size transparency adapter lid that would scan negs up to 8x10, but at a lower resolution. I'd be cautious, Ed, of earlier models that may not continue to have good support. Check the Epson.com site to see what they are currently selling. I currently use the Epson 3200, and have been quite pleased with it. Link to comment Share on other sites More sharing options...
jbq Posted September 12, 2003 Share Posted September 12, 2003 Brian: as odd as it seems, those can scan transparencies up to about 4x10, and prints to 8.5x11 - transparencies are limited by the backlight, and prints are limited by the width of the sensor and the length of the glass. I imagine that creating a (partially) collimated uniform 8.5x11 light in a small package isn't as easy as it seems, and that Epson considered that the market for a scanner capable of widths higher than 4" wasn't worth the effort and/or the cost. Link to comment Share on other sites More sharing options...
mike_castles Posted September 12, 2003 Share Posted September 12, 2003 Ed, I can't comment on the ones listed, but can tell you for the $ the Microtek Scanmaker 5900 is a decent buy for around $150 and it comes with a transp. adpater for up to 4x5 (4800x2400 dpi). Not a high end by any means, but great for proofing and the odd print. Good luck.. Link to comment Share on other sites More sharing options...
neil_poulsen1 Posted September 12, 2003 Share Posted September 12, 2003 Ed, You can check the Digital Forum for additional infomation on different scanners. Neil Link to comment Share on other sites More sharing options...
brian_ellis3 Posted September 12, 2003 Share Posted September 12, 2003 Thanks for the information about the 2450 and 3200, digital never ceases to surprise. Link to comment Share on other sites More sharing options...
oskar_ojala Posted September 13, 2003 Share Posted September 13, 2003 I have an Epson 3200 and it works great for 4x5" negs/slides and 8x10" prints, but the originals you want to use are so big that pretty much anything with a decent transparency lightsource works. OTOH, if you get a new Epson, you can quickly and easily print high quality digital prints from the scans, provided that the sizes are reasonable (maybe 12x16" and smaller) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now