How to programm the IR Hasselblad Remote control for the 503CW?

[roberto_lara]

Hello everybody!!

Does anybody out there know how to programm the IR Hasselblad Remote

control that comes with the Winder for the 503CW?

I have the remote control but don't have any manual on how to programm it.

Thanks a lot.

Roberto

[curt_hagenlocher]

What's there to program? You set the Winder to "RC" and the remote to either "Single" "Cont" or "Multi", then press the button. Naturally, all the batteries have to work.

[squareframe]

1. attach winder (with batteries) to the camera<br>

2. select RC mode on the winder<br>

3. aim IR Remote at the infra-red CW sensor<br>

4. depress both winder and IR Remote Control release buttons at the same time for 3-4 seconds<br><br>

 

photo.net is best served when those that do not have the answers refrain from posting.<br>

[curt_hagenlocher]

<i>photo.net is best served when those that do not have the answers refrain from posting.</i><p>This is true! Having bought my winder used, I never had to do this step, and wasn't aware that it was necessary. Thanks for teaching me something new!

[squareframe]

no problem. it is a nice feature when you have multiple photographers with Hasselblad 503CW's and winders in close proximity, I suppose. otherwise, it is handy to know about if you lose your remote and buy a new one, or borrow one! they won't work until programmed!

[svennmess]

Thank you! I would never known the pairing (programming) step.