joachim Posted June 8, 1998 Share Posted June 8, 1998 Dear all, I recently got a C220 which has a fixed screen but dirty screen. When I looked at it, there are 5 screws visible on top of the silver shiny frame holding the screen. These are visible after removing the finder. The frame looks quite similar to the one you have to change on the C330f if you want to change the screen. My question is, whether I can unsrew this screws and clean the screen (just loose dust) or whether this will disadjust the screen position? <p> I definitely prefer a dirty but well adjusted screen over a clean misaligned one. Thanks in advance. Link to comment Share on other sites More sharing options...
eugene_crumpler Posted June 8, 1998 Share Posted June 8, 1998 I recently removed the screen on my c33 and man it was a mess getting it back together(there must have been 15 shims). I suggest that you clean it in place or have a pro do it. Link to comment Share on other sites More sharing options...
erling_johnsen Posted June 8, 1998 Share Posted June 8, 1998 Remove the lens ,and clean it that way.Hope you have some long fingers :-) But be carefull. <p> Regards Erling Johnsen Norway Link to comment Share on other sites More sharing options...
joachim Posted June 12, 1998 Author Share Posted June 12, 1998 Dear Gene, dear Earling, thanks for your replies. So unless I have to send it for repair for some other reason I think I have to live with this. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now