PaulWhiting Posted June 25, 2022 Share Posted June 25, 2022 (edited) For years I made and still make an Eboni based ink on my Paul Roark inkset. The Eboni is a bit warm to some folks, but using QTR I can vary the influence of a coolant in the Y position. I'm sure there are many of you have done this. Now I have a Canon ink printer and I like it in many ways. But out of the box I'm getting a black I find rather cold and sometimes even bluish. Almost the opposite! Is there some way to "warmify" my output? Generally speaking, is there a way to warm or cool the black dye? Or the black pigment cart? My printer is the Canon iP8720. One of its cartridges is a pigment black whereas the other five are dye. I use my printers as I would in the darkroom, to print so-called art photos in black and white. TIA! Edited June 25, 2022 by PaulWhiting www.paulwhitingphotography.com Link to comment Share on other sites More sharing options...
PaulWhiting Posted June 25, 2022 Author Share Posted June 25, 2022 Hope this is less arrogant! Try: "For years I've used and still use an Eboni based ink in my Paul Roark inkset." Paul www.paulwhitingphotography.com Link to comment Share on other sites More sharing options...
Ed_Ingold Posted June 25, 2022 Share Posted June 25, 2022 Given a choice, I print (CMYK) using "process black," which is three colored inks plus a little black. It gives a warm tone, without over-saturating the paper as in the RGB mode. Link to comment Share on other sites More sharing options...
Jochen_S Posted June 25, 2022 Share Posted June 25, 2022 Sorry, I am unlikely to ever acquire anything inkjet myself. For that reason I am not informed if your printer utilizes cartridges with "I am genuine and decided to declare myself empty" chips and who might have hacked those. Are there 3rd party pigment ink makers? If yes, I 'd look up Pantone tones close to my liking and ask for a quote. @Ed_Ingold 's suggestion above is by far the easiest way out, for an image. Link to comment Share on other sites More sharing options...
PaulWhiting Posted June 26, 2022 Author Share Posted June 26, 2022 Thanks, Ed. I've never heard of "process black", thanks for helping me expand my knowledge. That, and the phrase "over-saturating" as well. www.paulwhitingphotography.com Link to comment Share on other sites More sharing options...
PaulWhiting Posted June 26, 2022 Author Share Posted June 26, 2022 Given a choice, I print (CMYK) using "process black," which is three colored inks plus a little black. It gives a warm tone, without over-saturating the paper as in the RGB mode. Thanks Ed, those are new concepts for me! www.paulwhitingphotography.com Link to comment Share on other sites More sharing options...
PaulWhiting Posted June 26, 2022 Author Share Posted June 26, 2022 Sorry, I am unlikely to ever acquire anything inkjet myself. For that reason I am not informed if your printer utilizes cartridges with "I am genuine and decided to declare myself empty" chips and who might have hacked those. Are there 3rd party pigment ink makers? If yes, I 'd look up Pantone tones close to my liking and ask for a quote. @Ed_Ingold 's suggestion above is by far the easiest way out, for an image. Thanks Jochen, but I think my 3rd party pigment inks are under control. www.paulwhitingphotography.com Link to comment Share on other sites More sharing options...
Jochen_S Posted June 26, 2022 Share Posted June 26, 2022 In offset printing "process black" is the fairly low pigmented black ink, used for 4c printing. For other purposes there are intense (or deep?) black inks with more pigments. Of course nobody bothers to wash down process black and print images with something else. Which gives a choice between a rather grey image or overinking and getting a lot of dot gain that way. Thats why CMYK printing BW images makes sense. You could even ponder printing them wirhout UCR, which means more ink in total and related troubles while waiting and hoping for it to dry. Sorry, what do you mean by your third party inks are under control? Excluded by Canon? Your original question sounded a bit as if you were mixing your own inks. Link to comment Share on other sites More sharing options...
PaulWhiting Posted June 28, 2022 Author Share Posted June 28, 2022 Jochen, I've never had to define third party, but let me try... first party would be the manufacturer of the printer, the second party would ink made by the same company, and third party would be a company manufacturer other than the first two. Some third-party companies take great pains to get as close as they can to the manufacturers' specs. Myself I use about four different dilutions of black in my six-cartridge Epson so I do mix my own inks with a base fluid made mainly of Eboni black and glycerine. That's the best I can describe third party! Since my first post I've done some experimenting. By chance I happened to use two grades of paper, one white and one a rather warm white. The latter is all the warmth I need, it's the KISS principle in action. No need to get into the complications of different inks, just change the paper. I wonder how that stray sheet of pure white got into my paper source. Paul 1 www.paulwhitingphotography.com Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now