ralf_j. Posted September 11, 2020 Share Posted September 11, 2020 I am putting up this post to cover some of the "junk" cameras I have been finding at local fleamarket for a couple of dollars here and there. Some of the younger folks that use them today, go after the "effect" they generate such as light leaks, fuzzy photos, photos with complete lack of contrast or flares galore when shot against strong lighting. I have heard the kodak brownie no. 2 being called a Foggie, rightly so as its cardboard body develops leaks over time. I am of a different mindset; yes these cameras were mass produced consumer grade cameras, but they weren't produced to create those special effects the current "analogue" crowd is so smitten with. They were produced to provide the best image they could within the limited/cheap materials used to increase sales and profit margins. Some of these are rivet-nailed cameras with little remedy or hope in restoring them, however if one looks closely enough, a lot of them can be helped, either with some creativity or trial and error. I am attaching below some of the most recent "junkies" I have worked on and some details of this work. 2 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 A Bencini Comet 200 for 126 film, disassembled, cleaned, and put together. 2 screws inside film chamber and one screw is revealed when depressing the shutter button. Care needs to be applied when put together as the shutter needs to be half depressed to put the hidden screw together. Loaded with Kodak Instamatic 200 film from 1991, perhaps I can get a few images. 3 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 Ansco Readyflash 620, dirty and rusty as they usually are. A little trial and error came handy here, where the error resulted in an extra unit I had taking a little more damage then anticipated (hey you learn from errors too). At first, you would think this camera can not come apart, WRONG. The front standard holding the shutter and lens, pivots on two posts. The whole front standard is twisted around these two posts as you would on a keyhole type painting hanger. 2 plastic notches on the view finder and a bendable metal arm over one of the "keyholes" hold the shutter from moving around. A thin flat head screw driver helped lift the metal arm, a small tug of the standard and a twist release shutter and lens; two retaining screws in the back separate the shutter from lens and voila... To assemble reverse the process. 2 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 Back of shutter 3 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 Assembled 4 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 A Spartus Vanguard in 127 format. Two screws on front removed, help slide off the front plate, giving access to shutter, internal side of the lens, viewfinder and flash contacts. 3 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 Spartus Assembled 3 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 A brownie junior that has seen better days. Not too terrible with options such as Instant and Timed shutter, and a two aperture option with a lever pull. Four screws on front plate give access to shutter. The lens can only be accessed from inside the film chamber and the front with the aid of a q-tip while you trap the shutter blade open. 5 Link to comment Share on other sites More sharing options...
kmac Posted September 11, 2020 Share Posted September 11, 2020 Excellent work, thanks for sharing 2 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 Excellent work, thanks for sharing Thank you sir 1 Link to comment Share on other sites More sharing options...
rick_drawbridge Posted September 11, 2020 Share Posted September 11, 2020 Thanks, Ralf, that's informative and inspiring. I find these "peoples' cameras" really interesting, and I notice also that many of the little 35mm compact cameras from around the turn of the century are now attracting the interest of collectors. 2 Link to comment Share on other sites More sharing options...
John Seaman Posted September 11, 2020 Share Posted September 11, 2020 That's interesting Ralf, thanks. It's only when you start to open these "simple" cameras up, that you realise how clever the designers actually were. And yes, I've often cleaned the lens rear with a Q tip poking through the open shutter. 1 Link to comment Share on other sites More sharing options...
JDMvW Posted September 11, 2020 Share Posted September 11, 2020 Terrific. More is even better:) 2 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 Thanks, Ralf, that's informative and inspiring. I find these "peoples' cameras" really interesting, and I notice also that many of the little 35mm compact cameras from around the turn of the century are now attracting the interest of collectors. Yes, competition for these cameras is becoming an issues on www. I am also seeing the 1980s point and shoots attracting a quite a bit of attention, i.e. Olympus Infinity line, Ricohs, Canon AF-M/Snappys and or Minolta HiMatic AFs 2 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 That's interesting Ralf, thanks. It's only when you start to open these "simple" cameras up, that you realise how clever the designers actually were. And yes, I've often cleaned the lens rear with a Q tip poking through the open shutter. Oh good, John, I am glad I am not the only one :-). BTW, some of these use plastic lenses, and plastic lenses do not like qtips at all, usually end up with plenty of scratches :-), that's why dish soap and water it is for these ... 3 Link to comment Share on other sites More sharing options...
ralf_j. Posted September 11, 2020 Author Share Posted September 11, 2020 Terrific. More is even better:) JDM, my old friend, the GDR King, hope you are well and hope you still remember me. It is heart warming to see some of the familiar posters here. 2 Link to comment Share on other sites More sharing options...
JDMvW Posted September 11, 2020 Share Posted September 11, 2020 It's you! Welcome back, very much. 2 Link to comment Share on other sites More sharing options...
chuck_foreman1 Posted September 22, 2020 Share Posted September 22, 2020 Hey Ralf_J Nice to se you posting again.. my posts are getting further apart.. but my hearts still in it .. a few setbacks.. but in my mind I'm shooting my classics and achieving great success!! . I recall some MF wooden cameras you restored. Did some nice work with them too... Jump in ol' friend the water'S fine! 1 Link to comment Share on other sites More sharing options...
Mike Gammill Posted September 23, 2020 Share Posted September 23, 2020 Thanks for sharing, Ralf. I look forward to seeing some images from these cameras. Link to comment Share on other sites More sharing options...
ralf_j. Posted September 23, 2020 Author Share Posted September 23, 2020 Hey Ralf_J Nice to se you posting again.. my posts are getting further apart.. but my hearts still in it .. a few setbacks.. but in my mind I'm shooting my classics and achieving great success!! . I recall some MF wooden cameras you restored. Did some nice work with them too... Jump in ol' friend the water'S fine! Chuck buddy, how are you, all ok in Deutscheland? So good to see you. Link to comment Share on other sites More sharing options...
ralf_j. Posted September 23, 2020 Author Share Posted September 23, 2020 Thanks for sharing, Ralf. I look forward to seeing some images from these cameras. Hi Mike, you bet, good to see you. Link to comment Share on other sites More sharing options...
ralf_j. Posted September 23, 2020 Author Share Posted September 23, 2020 Thanks for sharing, Ralf. I look forward to seeing some images from these cameras. Hi Mike - I as well :-). Have already exposed one roll through Ansco, will see where its sweet spot is. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now