10965030 Posted May 21, 2018 Share Posted May 21, 2018 I have a Leica 391427 K Kugellager IIIc camera my father bought in early 50's from an officer that returned from Germany. The top of the camera is grayish black and has a base plate that appears to be stainless. I have been told that the base plate should match the top. I wouldn't think that the camera which was fairly new back then would have had it replaced. I would like your thoughts. Thanks in advance. Link to comment Share on other sites More sharing options...
Troll Posted May 21, 2018 Share Posted May 21, 2018 I have a Leica 391427 K Kugellager IIIc camera my father bought in early 50's from an officer that returned from Germany. The top of the camera is grayish black and has a base plate that appears to be stainless. I have been told that the base plate should match the top. I wouldn't think that the camera which was fairly new back then would have had it replaced. I would like your thoughts. Thanks in advance. Probably original -- in those days they were hard-pressed to stick to exact details. Link to comment Share on other sites More sharing options...
Richard Williams Posted May 21, 2018 Share Posted May 21, 2018 I don't know if any left the factory that way, but things get lost or damaged, especially when there's a war going on. The baseplates are brass, either chrome-plated (the preferred finish in the 40s and 50s, and by far the most common) or painted (apparently due to a shortage of materials). If someone needed a replacement baseplate, it might just have been easier to find a chrome one. Link to comment Share on other sites More sharing options...
10965030 Posted May 22, 2018 Author Share Posted May 22, 2018 I don't know if any left the factory that way, but things get lost or damaged, especially when there's a war going on. The baseplates are brass, either chrome-plated (the preferred finish in the 40s and 50s, and by far the most common) or painted (apparently due to a shortage of materials). If someone needed a replacement baseplate, it might just have been easier to find a chrome one. It doesn't have the look of chrome plate. If I have time tomorrow, I'll try to load pic. Link to comment Share on other sites More sharing options...
james_elwing Posted May 22, 2018 Share Posted May 22, 2018 Base sounds quite interesting. Leica body chrome often looks a bit matted and soft, so that's probably what it is, just a replacement for a lost or damaged part. Yes photos would be nice, thanks. Link to comment Share on other sites More sharing options...
10965030 Posted May 23, 2018 Author Share Posted May 23, 2018 Pic of camera and baseplate. The reason I think baseplate is stainless - look at chrome on lock knob compared to rest. Link to comment Share on other sites More sharing options...
Sanford Posted May 23, 2018 Share Posted May 23, 2018 I'm no expert, but that doesn't look like a Leica. Link to comment Share on other sites More sharing options...
Richard Williams Posted May 23, 2018 Share Posted May 23, 2018 I'm no expert, but that doesn't look like a Leica. It's definitely a Leica! Not sure the photos indicate anything unusual (the centre and upturned edge of the lock on my IIIa also look shinier than the rest of the baseplate) but perhaps it looks different in the flesh? Is that 'bronzed' look in the first photo just the lighting? If you think the the whole plate is not made from the usual brass, you could always weigh it and compare with another IIIc plate - brass is denser than stainless steel. But this seems unlikely. It may be that Leica was using non-standard plating 'formulas' at the time due to shortage of materials (as with the tatty chrome seen on many post-war IIIc bodies). Link to comment Share on other sites More sharing options...
Sanford Posted May 23, 2018 Share Posted May 23, 2018 My mistake, a little research in "Leica III Images" shows it to be a rough looking but real Leica. Link to comment Share on other sites More sharing options...
10965030 Posted May 24, 2018 Author Share Posted May 24, 2018 'bronzed' look is lighting. The center of the looks like chrome on controls on top. Any idea what a brass plate weights? I just have the one. Thanks Link to comment Share on other sites More sharing options...
Richard Williams Posted May 24, 2018 Share Posted May 24, 2018 My post-war IIIc plate weighs 44g. Link to comment Share on other sites More sharing options...
james_elwing Posted May 24, 2018 Share Posted May 24, 2018 I get 47g, again post war, by electronic scales, so who can be sure. I have another few at work I can check, one of which is wartime 1941 I think. Link to comment Share on other sites More sharing options...
10965030 Posted May 25, 2018 Author Share Posted May 25, 2018 My plate is 1 oz which I converted to 28.3495g Link to comment Share on other sites More sharing options...
james_elwing Posted May 25, 2018 Share Posted May 25, 2018 mine are 47g, 44g, 44g Yours is for the larger tripod screw, therefore, should be 44g. What are you using to measure it? 1 oz seems rather a round figure. I am pretty sure the base is for a IIIc, as the IIIf bases I have seen look different at the tripod screw. Link to comment Share on other sites More sharing options...
Richard Williams Posted May 25, 2018 Share Posted May 25, 2018 My plate is 1 oz which I converted to 28.3495g That is very light if your scale is accurate! Do you have a photo of the other side? The fittings might offer some clue. Link to comment Share on other sites More sharing options...
10965030 Posted May 26, 2018 Author Share Posted May 26, 2018 That is very light if your scale is accurate! Do you have a photo of the other side? The fittings might offer some clue. I will get a pic this weekend. The only scale I have is a food scale that measures in ounces. I would assume its fairly accurate. Link to comment Share on other sites More sharing options...
10965030 Posted May 27, 2018 Author Share Posted May 27, 2018 Here is camera side of base plate Link to comment Share on other sites More sharing options...
james_elwing Posted May 27, 2018 Share Posted May 27, 2018 Looks like a regular Leica base plate to me, minus the film loading instructions Link to comment Share on other sites More sharing options...
mukul_dube Posted May 27, 2018 Share Posted May 27, 2018 The base plate looks like the usual chrome plated brass. Link to comment Share on other sites More sharing options...
Richard Williams Posted May 27, 2018 Share Posted May 27, 2018 My IIIc has the film loading instructions on the cover of the shutter crate rather than on the plate. Are there any divisions on the scale smaller than an ounce, like 1/8 oz or 1/16 oz? If there are, and the weight of the plate is dead on 1 oz and the unladen zero is dead on zero, you can check its accuracy by weighing a known volume of water (1ml = 1g). If there aren't, it's not precise enough to measure a 15g (about half an ounce) difference. You could weigh the plate on the scale at a post office, or get a digital scale from Amazon for the price of a roll of Portra. Link to comment Share on other sites More sharing options...
james_elwing Posted May 28, 2018 Share Posted May 28, 2018 Of course you are right, Richard. No loading instructions appear to ever be on the base plates. Link to comment Share on other sites More sharing options...
Richard Williams Posted May 28, 2018 Share Posted May 28, 2018 Looking at my IIIa, it does have the diagram on the base plate. The IIIc has a cover over some of the moving parts that are exposed in the earlier camera, giving them a handy place to mount the diagram so it's always in front of you when loading, a refinement I've never really noticed until this thread! Link to comment Share on other sites More sharing options...
james_elwing Posted May 28, 2018 Share Posted May 28, 2018 Irritatingly right again, Richard. I knew the thought must have come from somewhere. There are no such instructions on my Leica I; I should look further before I say anything more. Thank you. Link to comment Share on other sites More sharing options...
10965030 Posted June 6, 2018 Author Share Posted June 6, 2018 Went to a coin dealer who has accurate scale- used to count coins. Plate is 42 grams - could believe how off food scales were. It still doesn't make sense that the plate would have been replaced when the camera was just a few years old. I know the base plate is the same sense my family has owned. Link to comment Share on other sites More sharing options...
james_elwing Posted June 6, 2018 Share Posted June 6, 2018 If the original plate was damaged or lost, what you have would have been a common sense replacement. Incidentally, what colours are the shutter curtains; could be red & black; very desirable. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now