sfcole Posted December 2, 2017 Share Posted December 2, 2017 Hi, I've inherited a Rollieflex. I'm not 100% sure about the model, but the serial #1451499 indicates it's from 1952-55, and possibly a 2.8c, model k7c. It has a Schneider Xenotar 2.8/80 taking lens, and the shutter is a Synchro-Compur. Here's my question: all of the models I've seen go to 1/500 second shutter speed (1 has 1/400). However, on this camera, the shutter markings in the window just above the viewing lens only goes to 1/250. The wheel will go no further, and there's no 500 even visible to the right. Does the fact that 1/500 is absent mean there is something wrong with the linkage mechanism, or are there actually models that only go to 250? thanks Link to comment Share on other sites More sharing options...
Bill C Posted December 2, 2017 Share Posted December 2, 2017 Hi, try setting the shutter speed to 1/500 before cocking the shutter. That is, you have to decide that you're going to use that setting prior to advancing film from the prior shot. Link to comment Share on other sites More sharing options...
fwstutterheim Posted December 2, 2017 Share Posted December 2, 2017 The 1/500 sec speed should be present. You are right about a possible linkage problem. When putting the camera front together shutter and setting wheels should be in a distinct position in order to get the linkage right. Your camera may be the victim of an amateurish repair. It can be put right. Ferdi. Link to comment Share on other sites More sharing options...
ben_hutcherson Posted December 3, 2017 Share Posted December 3, 2017 I forget if this is the case on the synchro-compur, but on a lot of older Compur shutters there is a "booster" spring to engage 1/500th. As said, try engaging it before cocking the shutter and it often takes a fair bit of effort even then to engage 1/500. You should feel a "bump" and then should drop as it slides into 1/500. By all means don't be afraid to push a bit on the wheel, although of course don't force anything. Link to comment Share on other sites More sharing options...
Bill C Posted December 4, 2017 Share Posted December 4, 2017 As said, try engaging it before cocking the shutter and it often takes a fair bit of effort even then to engage 1/500 A 2.8C should roll smooth as silk into the 500 position AS LONG AS IT'S UNCOCKED. If it IS already cocked, all speeds EXCEPT 1/500 can be easily set. Link to comment Share on other sites More sharing options...
sfcole Posted December 4, 2017 Author Share Posted December 4, 2017 Thanks everyone. The problem was in fact that it was cocked first. When I tried it uncocked, it did go into 1/500. It's an odd way to do it--not sure what they're trying to prevent. And it takes a rather long throw of the wheel to get it to 500. But it does work. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now