georg_kern Posted July 22, 2004 Share Posted July 22, 2004 I found that my flash never fires at full power in remote TTL, even at small apertures/low ISO/bounced mode, so it is barely useable for, lets say, bounced flash. Equipment is a 700si (built-in flash as controller) and a Metz MZ40-3i with a 3301-M1 adaptor. Two explanations come into my mind: 1) max. flash output is reduced, so that it does not interfere with the controlling signals, or 2) compabitility problem, because the SCA3301 is first generation, and only the xi-series are mentioned in its manual (but AFAIK 700si and 7xi are almost identical in their electronics). Anyone with more experience than me? Thanks, and regards Georg Link to comment Share on other sites More sharing options...
michael_hohner Posted July 22, 2004 Share Posted July 22, 2004 It's #2. This doesn't happen with Minolta brand flashes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now