Eskophot Ultragon 9/150-lens-thread

[michael_przewrocki2]

<p>Have the Eskophot Ultragon 9/150 here. for mounting in Copal 1. adapter needed.<br>

Can you confirm if 32 x0.75 or 32.5 x 0.75 -mount. i measure 32,43.but counterring is 31.87. so it could be really M32.</p>

 

[michael_przewrocki2]

<p>i measure 32,43.but counterring is 32.02(corrected).<br /> Is it really M32 or 32.5mm?</p><div></div>

[michael_przewrocki2]

<p>one more image</p><div></div>

[michael_przewrocki2]

<p>SOLVED: M32.5 x.75</p>

[michael_przewrocki2]

<p>No filterthread. any good idea for a sunshade?<br>

outer diameter is almost 61mm. inner is 49mm. so a good clip-on system could work.</p>

[michael_przewrocki2]

Wrong information about Eskofot Ultragon 9/150!

Its M32.5 X.5 NOT .75

we made wrong sized adapters. and hole is too small for G-Claron.

Eskofot-since tube is smaller than on G-claron- goes through(see below) and i can turn approx. 1/2 turn.

 

see also this thread but i con confirm since i have the right and wrong adapters here:

http://www.photo.net/large-format-photography-forum/009MOW

The 150mm G-Claron has an M32.5/0.5 thread that I can adapt using the Schneider 0 to Leica adapter.

larry menzin sept. 13, 2004

be aware of this too:

G-Claron 9/150 has the same thread(confirmed by lens-data-sheet of schneider. but tube is a bit bigger.the hole of adapter MUST BE 32mm. if 31.86mm like the producer of my adapter made then G-Claron cannot go through!

if schneider-kreuznach library is needed. its offline now but can be recovered via archive.org. i uploaded the files(zip if i dont err) to the files of largeformat on FB. sorry FB currently offline. but there must be a link which one can search for in archive.org