kevin_mahoney1 Posted December 9, 2013 Share Posted December 9, 2013 <p>Is there any way I can control my FL-50R flashes wirelessly with the E-M1 (as I could with the E3?)</p> Link to comment Share on other sites More sharing options...
Greg M Posted December 9, 2013 Share Posted December 9, 2013 <p>Yes, you have to use the accessory clip on flash included with the E-M1, just like you had to use the flash on the E-3. Works the same way.</p> Link to comment Share on other sites More sharing options...
GerrySiegel Posted December 11, 2013 Share Posted December 11, 2013 <p>I found that I can still use a 19 year old mini flash I bought for Camedia 5050 Z. I prefer to conserve the EM-1's small battery for now; And yes,the little FL 20 with two AA cells works in TTL mode with the EM-1. Maybe Kevin can come over though and help me partner the camera with my iPAD. Still playing with that function:_)</p> Link to comment Share on other sites More sharing options...
GerrySiegel Posted December 16, 2013 Share Posted December 16, 2013 <p>I hasten to add that my FL 50 original has not wireless remote capability. Which doesn't bother me at all. Reason is that I have switched to the separate Vello radio trigger (not limited to line of sight and with multiple flash zones set by switches, and a two color display for focus and then release fnxn).<br /> Likely there are downsides. Maybe the clip on flash will wake up off camera flashes?I do needto have a cable to fit into the proprietary Canon port on the EM-1 which is different than the round one on the E-3 as you may have noticed and Oly does not include same except for computer hookup, the multi port or whatever they call it.... An 8 buck extra. As to TTL, that is a non starter so far, although I do not typically try to get TTL in any off camera flashgun, as I expect to set up manually off camera flashes. The big value of using a battery powered accessory to trigger off camera is to preserve the limited juice in the E-M1. I may never use the little included flash, not sure. Even as a trigger device. I can tell you more about my setup when I get better aquainted with the E-M1, such as the effect of plus/minus flash compensation via lever position #2.<br> Latter I would likely adjust <em>directl</em>y on the FL 50/50R. Whatever works best for you Kevin....gs</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now