ismail_ba_aran Posted September 4, 2013 Share Posted September 4, 2013 Dear members, I am facing a strange situation and seek for your support if anyone have seen a similar problem. I am a D800 owner and use it with some AF-D lenses and also have 16-35, 105 mm Af-S nikkor lenses that I use without a problem. Recently I sold my 28-300 lens and bought a second hand 24-120 mm f4 nikkor lens. When I bought the lens I tried it with a D7000 and the lens is in a mint and proper condition. Here comes the point : the lens does not auto-focus and expose on my D800. On live view, it auto focuses but does not expose. Before sending this post, I tried the lens on another D800 and D3000 and it works perfecly. Before sending the body to repair, I wanted to check whether anyone heree faced a similar issue and (hopefully) it has a quick and easy solution that I oversee. Link to comment Share on other sites More sharing options...
georges_pelpel Posted September 4, 2013 Share Posted September 4, 2013 <p>Have you tried to clean the camera contacts (the 8 silver metallic contacts above the camera lens opening)?<br> You might have dust on them preventing electronic transmission between the camera and lens.</p> Link to comment Share on other sites More sharing options...
ismail_ba_aran Posted September 4, 2013 Author Share Posted September 4, 2013 Yes I did it. The motor drives the lens but no auto focus or exposure. The strange thing is the body works fine with other lenses and the lens works fine with other D800. There is somehow no intercorporation with my own D800 and the lens. Link to comment Share on other sites More sharing options...
jonb Posted September 4, 2013 Share Posted September 4, 2013 <p>If you can, I would send both the camera body and the lens in to the repair shop. Since the lens works on other cameras, and since the camera works with other lenses, it's not clear which unit is at fault. Plus, the technician may not be able to reproduce the problem with only one of the units. Having both the camera and the lens will ensure that the problem is easily demonstrated, and that will allow the technician to troubleshoot it.</p> Link to comment Share on other sites More sharing options...
ismail_ba_aran Posted September 4, 2013 Author Share Posted September 4, 2013 Thx Jonathan. That is what I am going to do if someone will not tell me a firmware, or setup related thing that I miss, which may let me to overcome the issue. I do not have a repairshop nearby and I need to send both with courier, which bothers me a bit. Link to comment Share on other sites More sharing options...
ShunCheung Posted September 4, 2013 Share Posted September 4, 2013 <p>I am sure that firmware is not the issue. I have had the 24-120mm/f4 AF-S VR since 2010 and used that on early versions of the D800 and D800E last year without any problems. I would re-clean the electronic contacts on both the lens and the body around the mount. Hopefully that would fix the problem. If not, I agree that it is a good idea to send both to the repair shop.</p> Link to comment Share on other sites More sharing options...
ismail_ba_aran Posted September 4, 2013 Author Share Posted September 4, 2013 Georges, Shun, thx for being pushy for the same suggestion. I repeated the cleaning and got back the communication between the body and the lens. I cant say there was a significant amount of dust, or dirt but whatever it is, it worked. Thx again. Link to comment Share on other sites More sharing options...
ShunCheung Posted September 4, 2013 Share Posted September 4, 2013 <blockquote> <p>I cant say there was a significant amount of dust, or dirt but whatever it is, it worked.</p> </blockquote> <p>I am glad that it is working now. In most of these cases, the problem is oxidation on the electronic contacts. Once you clean that so that the electronic signal is communicating, the problem is resolved. If something is indeed broken inside, that lens/body should not work with other body/lens.</p> Link to comment Share on other sites More sharing options...
georges_pelpel Posted September 4, 2013 Share Posted September 4, 2013 <p>Good to know cleaning made it worked.<br /> I had a similar issue with my 70-200/2.8. Suddenly AF would stop working. Jiggling the lens a bit made the function come back.<br /> I assume your issue was with the camera. The lens contacts are pointy so if one was oxidized it would probably have made the lens unworkable on any body.<br /> On the other hand the camera contact are rather large and each lens doesn't have its contacts fall in the exact same location as other lenses. So you could have a small patch of dirt or oxidation just where one of the 24-120 contacts landed preventing that lens to work but yet allowing others to work as their responsive contact pin was slightly to the side of the dirty patch.</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now