alastair_anderson Posted June 22, 2013 Share Posted June 22, 2013 <p>Hi everyone, I bought Capture NX2 recently but haven't got around to using it until today. I'm a little surprised to see that it is not reading my D800 raw files. Have I missed something here? Do I need ViewNX?</p> Link to comment Share on other sites More sharing options...
Matt Laur Posted June 22, 2013 Share Posted June 22, 2013 <p>No, you don't need View NX2 (though it's actually kind of helpful as a high-speed way to browser through and score files before opening them for editing in Capture).<br /><br />What you probably need is the latest VERSION of Capture NX2. It's a quick download from the Nikon web site. It will install right over top of your existing version. While not likely an issue, make a point of having a record of your serial number in case it's needed for some reason during upgrade/re-install. Putting in the new version only takes a few minutes, and you'll be up to date.</p> Link to comment Share on other sites More sharing options...
howard_m Posted June 22, 2013 Share Posted June 22, 2013 <p>are you sure you have the latest version?</p> Link to comment Share on other sites More sharing options...
elliot1 Posted June 22, 2013 Share Posted June 22, 2013 <p>deleted.</p> Link to comment Share on other sites More sharing options...
alastair_anderson Posted June 22, 2013 Author Share Posted June 22, 2013 <p>I would be surprised if I don't have the latest version because I only downloaded it a few weeks ago. Mine is version 2.4.2</p> Link to comment Share on other sites More sharing options...
alastair_anderson Posted June 22, 2013 Author Share Posted June 22, 2013 <p>I was opening the file(s) straight from a card reader. I've now moved them to my desktop. I'll try again.</p> Link to comment Share on other sites More sharing options...
alastair_anderson Posted June 22, 2013 Author Share Posted June 22, 2013 <p>double post.</p> Link to comment Share on other sites More sharing options...
alastair_anderson Posted June 22, 2013 Author Share Posted June 22, 2013 <p>The card reader may have been the problem. The glitch seems to have gone. I had to reboot my Mac. but the programme is reading the files now. Sorry about that. Thanks for the incredibly prompt replies. Love photo.net!</p> Link to comment Share on other sites More sharing options...
CvhKaar Posted June 22, 2013 Share Posted June 22, 2013 <blockquote> <p> The glitch seems to have gone.</p> </blockquote> <p>Not a glitch, but as designed ... Programs like these do not and should not update files in your camera, so you'll Always have to lupload (down ???) into your Mac, or PC before processing / changing it by a program running on your PC/Mac....</p> Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted June 23, 2013 Share Posted June 23, 2013 <p>I don't believe there's anything about the design of NX2 that prevents it from opening a file from <em>any</em> location. My Windows version 2.3.2 opens NEF files direct from a CF card in my card reader without issue or a warning dialogue.<br> It's not as if it's automatically going to overwrite the file unless specifically asked to. - Unlike the awful MS Windows Picture and Fax viewer, which will rotate and overwrite a file without let or warning!</p> Link to comment Share on other sites More sharing options...
joseph_smith3 Posted June 23, 2013 Share Posted June 23, 2013 <p>The latest version of Capture NX2 2.4.3. If you do not have this version go to <a href="http://www.nikonusa">www.nikonusa</a> sofware downloads and get it. Make sure you read this first:<br> This is the <strong>Capture NX 2.4.3 software download</strong> - This software updates Capture NX 2.3.0 - 2.4.2 to version 2.4.3. You must have Capture NX 2.3.0 to 2.4.2 installed to perform this update. When this updater software is run, it may be necessary to enter the product key again to confirm ownership of previous version of this software.<br> It could be that the version you bought is not current for D 800 files and it has to be updated. This unfortunately happens all the time with most software. The first thing I do after loading any new software is to check for updates.<br> Joe Smith</p> Link to comment Share on other sites More sharing options...
alastair_anderson Posted June 24, 2013 Author Share Posted June 24, 2013 <p>Thanks, Joseph. I'll check for the update. I'm not good with such things. I believe my camera firmware is one update behind too. In any event Capture NX2 seems to be working ok now.</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now