psychophoto Posted December 17, 2002 Share Posted December 17, 2002 I'm one of those guys who uses lens hoods <u>religiously</u>. Feel naked without 'em. I normally have a #12586 hood on my 50/1.4 Lux, but when I want to use a filter I'm a little out of luck as the hood of course won't clip on with a filter there too. My solution - find a 43mm screw-in lens hood to use when I'm shooting with a filter in place. Problem is, the only ones I can find are the rubber folding kind, which I absolutely cannot stand. I use metal hoods as much for protection against knocks on the front of the lens as for flare reduction, so I've never been too keen on the rubber ones. Does anyone know of any metal screw-in shades for 43mm that have ever been manufactured? If I can't find something like that, I'm debating getting like a 46mm screw-in hood (fairly easy to get) and using a step-up ring. Any alternate ideas here or obvious solutions I'm missing? Thanks. Link to comment Share on other sites More sharing options...
william_john_smith Posted December 17, 2002 Share Posted December 17, 2002 Go to: http://cameraquest.com You will find what you need. I just got a 39mm to replace the pull out on the 50mm. Also cheap! Link to comment Share on other sites More sharing options...
fotografz Posted December 17, 2002 Share Posted December 17, 2002 Which make of filters are you using? I found some of them won't allow you to replace the shade and others will. Heliopan (slim mount) seems to work with Leica hoods. Link to comment Share on other sites More sharing options...
giles_poilu Posted December 17, 2002 Share Posted December 17, 2002 Heliopan make a range of metal hoods including E39 size upwards - a short model (for 35mm upwards) and a longer telephoto model. Very well made in black aluminium. More compact if you have an older clip on 12585 type hood. Link to comment Share on other sites More sharing options...
furcafe Posted December 17, 2002 Share Posted December 17, 2002 David: 43mm was the standard filter thread for the 35mm & 50mm lenses for the Nikon RFs (as well as those Nikon made in LTM), so yes metal lens hoods were made in that size (I also hate rubber hoods & prefer screw-in to slip-on or clip-on metal hoods). Original screw-in & clip-on Nikon RF shades can be found on eB*y--they're not cheap, but shouldn't be any more expensive than Leica accessories provided you don't care about cosmetic condition, original boxes, etc. My favorite RF hoods are the vented 1s made by Kenko, Hoya, & Walz in the 40mm (for Canon RF lenses), 40.5mm (for most Zeiss Ikon Contax RF lenses) & 43mm sizes (see pic). They come up on eB*y occasionally, too, & shouldn't cost more than $25 (I believe Dante Stella just sold one for that price) & often come in a set w/filters for about $10-20 more. BTW, these hoods do work as impact protection: 1 of my Walz vented hoods sacrificed itself to save a Nikkor 50/1.4 LTM (a very heavy lens if you've never handled 1) that I dropped on the sidewalk face-down (never change lenses after a martini happy hour!), the hood broke into 3 pieces, but the lens was fine. Link to comment Share on other sites More sharing options...
al_kaplan1 Posted December 17, 2002 Share Posted December 17, 2002 Although not as common as it once was, some dealers have "junk boxes" full of old "series" hoods and adapters. You might find a 43mm this route. Also, I think some Olympus lenses used 43mm hoods. Be careful with Nikon clip on hoods. The old ones had metal buttons that catch on everything. They sometimes pop off and they're too expensive to risk loosing! Link to comment Share on other sites More sharing options...
andrew n.bra hrefhttp Posted December 17, 2002 Share Posted December 17, 2002 I faced exactly this problem a few months back as well. I tried for <B>weeks</ B> to find something here in Australia but... nothing.<P> In the end I bought <B>two el-cheapo 43mm UV filters</B> (which itself was v.difficult!) and then <B>knocked out the glass</B>. Screwed the empty filter rings together, painted the interior with matt black and have used the result since. No vignetting and approx 10mm protective depth (almost the same as the E39 cylindrical hood for the Elmar-M).<P> I now only use the clip-on 12586 hood on rare ocassions, never for candid stuff. Link to comment Share on other sites More sharing options...
rgh Posted December 17, 2002 Share Posted December 17, 2002 I too am a lens hood fanatic, and wouldn�t think of taking a camera and lens out for a shoot with out the proper lens hood. Screw-in hoods just don�t do it for me because they add too much length to the package when I�m just carrying it around (not reversed) and too time consuming to take on and put on. Although they are expensive I would go with the newer LEICA E43 UVa 13206 filter, as this has a �extra� lip to take the proper 50mm Summilux lens hood. Also if you can find one the older Leitz chrome thin 43mm filters, they work of course. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now