sunilmendiratta Posted September 30, 2011 Share Posted September 30, 2011 <p>HI All,<br> I am sure here some of the folks are still using film cameras in addition to their digital ones. I am looking for advice on auto focus camera which i can use for B&W photography and portraiture. Please also suggest if image rendering may be different than AE1 Program or older camera bodies.(i know it is film dependent but still..)<br> I have Nikon Dx slr and i am switching to Canon 5D Mark 3(when it will launch), i am thinking to get EOS body so that i can use the same set of lenses.</p> <p>Many Thanks,<br> Sunil</p> Link to comment Share on other sites More sharing options...
michael_madio Posted September 30, 2011 Share Posted September 30, 2011 <p>The EOS-1v is THE top-of-the-line Canon AF film camera so maybe consider that. Image rendering depends on the lens and film, the body is just a light-tight box. The AE-1 is manual focus using Canon's FD mount (different that EOS). Try browsing Canon's on-line museum (<a href="http://www.canon.com/camera-museum/camera/film/chrono_1933-1955.html">http://www.canon.com/camera-museum/camera/film/chrono_1933-1955.html</a>) to give you an idea of what's available and to find what model has the features that are important to you.</p> Link to comment Share on other sites More sharing options...
jim_j2 Posted September 30, 2011 Share Posted September 30, 2011 <p>My two cents would be the EOS 3 body. Probably the current "best buy" in the upper end EOS film bodies.</p> Link to comment Share on other sites More sharing options...
mark_pierlot Posted September 30, 2011 Share Posted September 30, 2011 <p>Given the same exposure, focus, lens, and film, any film body will produce the same image as any other. What varies between them is how well they are able achieve exposure and focus.</p> <p>For example, some of the better EOS film bodies, such as the 1V and 3, have more exposure-related features than do FD bodies, such as more (and more sophisticated) metering modes, higher maximum shutter speeds, more aperture increments between the standard f-stops, and more readily selectable exposure modes. Any of these features can influence exposure, particularly under more demanding lighting conditions.</p> <p>As for an EOS film body recommendation, there's no question it would be either a 3 or a 1V. Good copies of the former can be had for around $150 these days, while the latter will set you back around $500.</p> Link to comment Share on other sites More sharing options...
ed_k__north_carolina_ Posted September 30, 2011 Share Posted September 30, 2011 <p>Elan 7E.</p> Link to comment Share on other sites More sharing options...
philip_wilson Posted September 30, 2011 Share Posted September 30, 2011 <p>best bodies are the 1V and the 3. If you get a 1V I suggest that you get the basic body not one with a winder (e.g. the 1V HS). I have two 1Vs (the HS and a standard body). I find the standard body gets used more as the HS is big and heavy (plus I never shoot 10 fps - 3.5 is fast enough). The 3 is almost a 1V but it has eye control focus. I like this but some do not. The other good body is the 1N, while the AF is only 5 point it is still fine for most purposes. If you want something really unusual the 1NRS is fun (with the pellicle mirror)</p> Link to comment Share on other sites More sharing options...
david_pickard Posted October 1, 2011 Share Posted October 1, 2011 <p>For low cost and very good, Elan 7(NE).</p> Link to comment Share on other sites More sharing options...
Andy Collins Posted October 1, 2011 Share Posted October 1, 2011 <p>My recommendation is always the 1v. Like Philip, I also have the power booster but tend to use the camera without it; I prefer the more compact size and lighter weight. It's an <em>awesome</em> camera! </p> Link to comment Share on other sites More sharing options...
mark_pierlot Posted October 1, 2011 Share Posted October 1, 2011 <p>I should add that I have a 1V, 1VHS, and 3, and, like Philip and Andy, prefer using the plain 1V over the others. The main advantage of the 1VHS for me is its vertical shutter release, but it's one heck of a beast to carry around all day.</p> Link to comment Share on other sites More sharing options...
JosvanEekelen Posted October 1, 2011 Share Posted October 1, 2011 <p>Depend on price etc. Forget FD (AE1 etc.) since it will not take EOS lenses. Have a look at the EOS 30/Elan 7 series as well. Can be had really cheap and I like the handling but that's something you will have to judge yourself.</p> Link to comment Share on other sites More sharing options...
sunilmendiratta Posted October 1, 2011 Author Share Posted October 1, 2011 <p>Please help me to understand the difference between<br> canon EOS 7/7E/7N/7NE/IIE(found these ones at keh). What is quartz date model?<br> Thanks,<br> sunil</p> Link to comment Share on other sites More sharing options...
gregf Posted October 1, 2011 Share Posted October 1, 2011 <p>I would go fot the iV, I just sold mine on EBay for $650, canon still lists it at over $2k.</p> <p>I believe that the quartz date was where the camera would imprint the datetime stamp on the image, consumers loved that back in the day; an erly for of EXIF data.</p> Link to comment Share on other sites More sharing options...
sunilmendiratta Posted October 1, 2011 Author Share Posted October 1, 2011 <p>I am going for 50 mm 1.8 lens is there any version of this lens or just one version.which one to take.</p> Link to comment Share on other sites More sharing options...
JosvanEekelen Posted October 1, 2011 Share Posted October 1, 2011 <p>see <a href="http://www.canon.com/camera-museum/camera/film/series_eos.html">http://www.canon.com/camera-museum/camera/film/series_eos.html</a> for the different Elan 7/EOS 30 models. The II is an older design, AKA EOS 50.</p> Link to comment Share on other sites More sharing options...
JDMvW Posted October 1, 2011 Share Posted October 1, 2011 <p>See also an earlier thread on the same topic: http://www.photo.net/canon-eos-digital-camera-forum/00ZN9M<br /> <strong>Body</strong><br /> I'd still recommend the Canon EOS 3 as one of the best, if also one of the more expensive (by film standards) of the older EOS cameras. Many of the earlier models can be purchased in good working condition on eBay for under US$ 40. They still work fine so long as you don't need the faster AF of the later versions.</p> <p>The EOS 1v is still apparently for sale new (old stock for sure) and is even more expensive. An in-between model is the slightly older EOS 1n. Many prefer the 3 to any of the 1 series film cameras.</p> <p><strong>QD</strong><br /> QD = "quartz-date" as Gregory said. There were QD backs/versions for some EOS film camera bodies.</p> <p><strong>EF 50mm f/1.8</strong><br /> There are only two versions to date of the EF 50mm f/1.8 lens. The original has a metal mount, and the Mark II version has a plastic mount. I do not think there is any other difference between the two variants. The plastic mount one is much cheaper, and seems in fact to be just as durable, even more durable than some other EF 50mm lenses seem to be.</p> Link to comment Share on other sites More sharing options...
juan_caballero Posted October 1, 2011 Share Posted October 1, 2011 <p>Is great that people still use film!</p> Link to comment Share on other sites More sharing options...
juan_caballero Posted October 1, 2011 Share Posted October 1, 2011 <p>Is great that people still use film!</p> Link to comment Share on other sites More sharing options...
sunilmendiratta Posted October 2, 2011 Author Share Posted October 2, 2011 <p>Yes it is really great and we all new photographers cam learn from their experiences.</p> Link to comment Share on other sites More sharing options...
zac williams www.williams Posted October 3, 2011 Share Posted October 3, 2011 <p>I wouldn't spend a ton of money on a film body without making sure you "really" want to use film. I have an Elan 7 that is a great camera for less than $100. I love film especially silky transparency film like Velvia F. I have always wanted a Nikon F100 so I picked one up off of ebay and took it on a cruise with a bunch of film. (I have a bunch of Nikkors laying around even though I shoot Canon.) After going through security too many times worrying about the cumulative x-rays and rationing film frames, I ended up using my point-and-shoot digital more than the F100. The film sat in the fridge for six months until I could get it to the E6 lab. I still haven't fired up the Ektagraphic projector to even really take a good look at the few rolls I did shoot.</p> <p>Some of my favorite images are film images, but more and more I realize that going back is probably not an option for me at this time. Maybe someday. B&W might do it, but then I think about stocking a darkroom to really do it right and cringe.</p> Link to comment Share on other sites More sharing options...
pjmeade Posted October 3, 2011 Share Posted October 3, 2011 <p>I've just picked up an EOS-1 to get back into film.<br> I haven't made my mind up yet whether I'll develop and scan myself or use a lab. I think the last time I processed and printed was in 1980.</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now