paulo_arellano Posted February 17, 2011 Share Posted February 17, 2011 <p>Hello everyone, i just purchased a yashica 635 which seemes to be in great condition physically but today while loading 120 film, I closed the back lid after aligning the arrows on the camera to the arrows on the film and the counter never turned to S or 1, it stays on what looks like a zero with a dot on the middle. I purchased the camera from its original owner through ebay and he gave me the manuals and 35mm kit but this is killing me becuase i dont know when to advance for my next shots. </p> Link to comment Share on other sites More sharing options...
jcofer1 Posted February 18, 2011 Share Posted February 18, 2011 <p>That indicates that the counter has not reset. When you open the back there should be a long metal pin protruding from the body in the upper right-hand side that is depressed by the back when it is closed; it has enough spring pressure behind it normally to force the back open when it is unlatched. If this pin sticks, the counter will not reset when the back is opened and the advance knob will not stop at each frame. Another thing; lose that strap before it breaks and your 635 ends up on the floor. It appears to be the original strap, and is probably 50 years old and completely untrustworthy.</p> Link to comment Share on other sites More sharing options...
paulo_arellano Posted February 18, 2011 Author Share Posted February 18, 2011 <p>the pin springs out when i open the back and springs down when i close it, but nothing happens to the counter. I e-mailed the original owner and he said he mostly used the camera for 35mm photography but hasnt used it since the 80s, maybe it needs some cleaning inside... how can i get this thing opened?</p> Link to comment Share on other sites More sharing options...
jcofer1 Posted February 18, 2011 Share Posted February 18, 2011 <p>Sounds like CLA time. Check with Mark Hama, the expert on these and other Yashica TLRs (when he did a CLA on mine he found his name inside, it was one he had assembled in the early 60s).</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now