dallalb Posted August 20, 2010 Share Posted August 20, 2010 <p>I'm very pleased with this monitor but I would like to know your opinion about the calibration results I've got (look at the attached images below). I use Nec's SV II software with Spider 3 colorimeter: I use "Monitor Default" as Contrast ratio target and every time I got the unbelieveble value of 3092:1! For what I knoe my NEC display has a contrast ratio of 1000:1... How this is possible? Am I missing something?<br />Thank you if you can give me an explanation of this issue.<br />Alberto.</p><div></div> Link to comment Share on other sites More sharing options...
Ed_Ingold Posted August 20, 2010 Share Posted August 20, 2010 <p>Software glitch?</p> Link to comment Share on other sites More sharing options...
digitaldog Posted August 20, 2010 Share Posted August 20, 2010 <p>Either way, set the contrast ratio manually to something like 300:1. </p> Author “Color Management for Photographers" & "Photoshop CC Color Management" (pluralsight.com) Link to comment Share on other sites More sharing options...
chas_frady Posted August 20, 2010 Share Posted August 20, 2010 <p>Well, technically, 108.2/0.035 is about 3092. But I'm suspecting the black level is wrong. It's very low. In my experience, the Spyder3 devices tend to be inaccurate in reporting the black point. The profiles produced are fine, but the reporting is off. For example, on the same monitor, my Spyder3 measures the black point at 0.43cd/m2, while my X-Rite DTP-94 measure 0.20cd/m2.</p> <p>Does this profile have any other obvious problems like banding or loss of shadow detail? Maybe on the next calibration, specify a black target that you know the monitor can produce, like 0.25cd/m2.</p> Link to comment Share on other sites More sharing options...
joseph_holmes1 Posted August 20, 2010 Share Posted August 20, 2010 <p>I just got the NEC P221W monitor today and I'd like to know what y'all think are good settings to start with -- I know I'll want to tweak them as I compare the image on the monitor with prints coming out of my Epson 3880, but I'd like to have a good idea a starting point for what SpectraView calls Intensity and Contrast Ratio.<br> (Of course I've got the standard D65 color temp and 2.2 gamma.)<br> I've got a decent looking monitor by setting it at Intensity = 175 cd/m2 and Contrast Ratio at 300:1 (Black Level .58 cd/m2).<br> Any suggestions?<br> Thanks.<br> -=-Joe</p> Link to comment Share on other sites More sharing options...
roger_smith4 Posted August 20, 2010 Share Posted August 20, 2010 <p>175 for intensity seems high. Does that remotely match your prints? I'm running this monitor at closer to 100.</p> Link to comment Share on other sites More sharing options...
digitaldog Posted August 21, 2010 Share Posted August 21, 2010 <p>175 isn’t out of the question. I’m running 150cd/m2 with my GTI box set to 50%. </p> Author “Color Management for Photographers" & "Photoshop CC Color Management" (pluralsight.com) Link to comment Share on other sites More sharing options...
joseph_holmes1 Posted August 21, 2010 Share Posted August 21, 2010 <p>I played around and settled on 110 cd/m2. It may be perfect for printing, but the monitor feels really dim for all the rest of the use -- web browsing, reading, etc.</p> <p>Didn't I read there's a way easily to switch between profiles?</p> <p>-=-Joe</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now