D80 top lcd display flashes after camera is off

[kira_greene]

<p>Hi,</p>

<p>I am on vacation right now, and my D80 has chosen to misbehave. This happned several times. The first time I had the camera off for about 20 minutes, after taking photos with my SB 600 attached and flashing. The flash and the camera were off, I removed the flash. The top LCD display flashed the settings, like blinking on and off until I turned the camera back on and off again.</p>

<p>Then, later I was not using the flash, and it was not attached or anything and after I'd get done taking photos, it would do the same thing after I turn the camera off - only for longer periods of time. </p>

<p>It hasn't done it the very last time I took photos. </p>

<p>Has anyone had this happen? All my firmware is up to date. I think my warranty is expired.</p>

<p>Advice besides calling Nikon?</p>

<p>Thanks!<br>

:)</p>

[jorish]

<p>Not sure if it helps you, but it can't hurt to do a reset I think. I can't find my D80 manual, but a Google search turned up a photo.net thread :) that explains how to reset (also check the posts further down): http://www.photo.net/nikon-camera-forum/00PBHH</p>

<p>Good luck!</p>