Konica III adjustment

[jackaldridge]

<p>Anyone know how to make the vertical adjustment on a Konica III rangefinder?</p>

[maiku]

<p>Jack,<br>

Near the viewfinder window there is a metal circle (ring) that sits vertically. There is a screw at the back. You must loosen the screw, but not remove it. Inside the ring there is another thin metal ring. You move the inner ring to adjust the vertical adjustment. The inner ring should have slots cuts into the side so you can use a small flathead screwdriver to move the adjustment ring. Once you find vertical parrallax retigten the screw.</p>

<p>I hope my directions are clear and correct. I am doing it from memory. It has been 6 months since I adjusted the vertical adjustment ring.</p>

<p>Mike</p>

[jackaldridge]

<p>Perfect Mike!<br>

Thanks...</p>