asher Posted January 14, 2009 Share Posted January 14, 2009 <p>Hi to all,<br> I've been doing some shooting with an old Zeiss 80mm C lens (uncoated), and I'm seeing occasional shots like the one below, usually with shots that are backlit. I shoot with a lens shade always.</p> <p>(a) Is this lens flare?<br> (b) If this is lens flare, are the coated lenses relatively resistant to this?<br> © If this is not lens flare, what is it?</p> <p>Thanks,</p> <p>Asher</p><div></div> Link to comment Share on other sites More sharing options...
dave_wilson1 Posted January 15, 2009 Share Posted January 15, 2009 <p>I think it's flare, pretty sure. Are you using one of those old silver square hoods. Looks like outer part of image is protected from light source as you get to center and element is exposed looks like flare in square shape of hood. Are you using any filters or is front bare? that could be trouble too.</p> Link to comment Share on other sites More sharing options...
chauncey_walden Posted January 15, 2009 Share Posted January 15, 2009 <p>That's what a light leak from the darkslide slot looks like.</p> Link to comment Share on other sites More sharing options...
david_smith35 Posted January 15, 2009 Share Posted January 15, 2009 <p>I think if this was a light leak from the dark slide slot, you would expect to see something on the right hand side of the image, not the left.</p> Link to comment Share on other sites More sharing options...
ulrik Posted January 15, 2009 Share Posted January 15, 2009 <p>First: a silver Hasselblad Planar is coated. Also the very earliest Hasselblad lenses from the late 1940s/early 1950s were coated. Anything else is plain nonsense. In the early 1970s T* coating was introduced which is an improved multilayer coating from Zeiss.<br> A light leak does not necessarily show on the side of the dark slide slot. So first change the darkslide seal. If the problem remains, well - than at least the most likely cause is ruled out.<br> Ulrik</p> Link to comment Share on other sites More sharing options...
asher Posted January 15, 2009 Author Share Posted January 15, 2009 <p>Thanks for your responses.<br> Dave Wilson: I'm using an old hood, but it's black. I'm not using any filters. But I agree- the square shape is likely the result of the square shape of the hood.</p> <p>Chauncey and Ulrik: I was suspicious of a light leak, however, this problem mostly seems to occur on frames that are backlit, and only occurs on 1-2 frames per roll. However, I don't recall which frames were sitting there when I removed the back, so perhaps there's a problem with the seal only when the slide is inserted or removed. However (again) I tested this back when I first bought it, removing it and replacing it several times for several frames on the roll and there was no evidence of this problem.</p> <p>Chauncey: I appreciate the clarification regarding the lens coatings. I am not familiar with the history of this gear. Do you think that a newer T* lens would ameliorate this problem, assuming that this is indeed lens flare?</p> <p>Thanks<br> <br /> Asher</p> Link to comment Share on other sites More sharing options...
asher Posted January 15, 2009 Author Share Posted January 15, 2009 <p>Looking around a bit more, this does indeed look like a light seal problem- I will replace the seal and see how that goes. Thanks again.<br> <br /> Asher</p> Link to comment Share on other sites More sharing options...
chauncey_walden Posted January 15, 2009 Share Posted January 15, 2009 <p>David, I know it would seem that the leak would show on the "right" side of the image since that is where the darkslide slot is, but it is up above the film like a window in a wall. The wall below the window shades the film at its feet and the light strikes across the room, glancing across the floor.</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now