Question re telephoto-type lenses for 5x4

[stuart_whatling1]

Folks,

 

<p>

 

Have just taken the plunge and got a Wista VX plus 90 & 150 Super Angulons but am looking for a longer lens too. Wista claim the VX can accomodate lenses up to 300mm but I was thinking about going for a telephoto design like the Nikon 360/8 which only needs 261mm of bellows draw.

My question is, are there any disadvantages to these telephotos? How do they rate optically compared with normal designs?

 

<p>

 

Finally, what about the converter units (ie interchangeable rear elements) - do these degrade the image much? Seems almost too good to be true that one could have a 360 and a 500 in only one and a half lenses and still be able to focus on infinity at 261mm...

 

<p>

 

 

(Finally thanks to all for the inumerable old posts on this BB which made the break into LF so much easier)

[scott walton]

Personally I feel that the convertable's aren't as sharp and the fact

that you use so much light... It seemed to me that the bellows draw

(in the field can be risky due to wind ect.) was a bit excessive also

but that may have been my imagination. I quickly went to a tele 360

and love it. Really the only down fall that I know of on the teles are

that they aren't optimized for really close up work... but that isn't

what you buy them for.

[glenn_kroeger]

Stuart: The telephotos aren't quite as sharp as a standard plasmat

but are nearly as sharp as some of the tessar and process lenses

(Nikkor M, G-Clarons). The telephotos are very large and heavy

though, and if you convert it to a 500mm it won't focus with 261mm of

bellows. That number only applies to the 300mm.

[brian_ellis3]

I used a Fuji 400T telephoto lens on a camera with 13 inches of

bellows and was very pleased with it. It took a Copal 1 shutter and

so was relatively small and light for a lens of that focal length,

about the same size as my 210 APO Symmar. I never performed any

scientific testing but it seemed to be as sharp as any other lens I

use. As a general proposition, convetibles are fine for contact

printing but except at their shortest focal lengths perhaps aren't so

good for enlarging. I use a Wollensak 360/500/630 triple convertible

for 8x10 contact printing but on the one occasion I tried making an

enlargement from the 500 focal length I wasn't too pleased. Of course

other convertibles might do better.

[bruce_m._herman1]

Stuart,

I had a Nikon 360 T and was generally pleased with it. I found it

sharp and contrasty when compared to all of the true 360's available

for my TK 45 (I tested Fuji A series, Schneider APO Artar, Schneider

Gold Dot Dagor and Rodenstock APO Ronar). The drawbacks to the

telephoto are its relatively small image circle compared to the other

lenses (much less rise/fall and tilt possible, but still not an

insignificant amount), and it didn't work well when the subject was

less than 10-15 feet away. These factors won't be issues for you if

you use the lens for conventional landscapes. They were for me and

I purchased the Gold Dot Dagor.

 

<p>

 

I never purchased the 500 mm rear element, and can't comment on its

performance.

 

<p>

 

By the way, the Nikon is relatively light and not overly expensive.

 

<p>

 

Good luck.

Bruce