elmar001 Posted December 5, 2007 Share Posted December 5, 2007 Hello, My R8 has a weird noise when I press against the back on the left side and along the bottom. It is kind of a rubbing or squeeking noise, and the back seems to move or flex a bit. It is very distracting when concentrating on a shot. It doesn't seem to do it when the camera has no film in it. Has anyone else with an R8 noticed this? Any help appreciated. Lawrence Christopher Link to comment Share on other sites More sharing options...
jens_k_olsen Posted December 5, 2007 Share Posted December 5, 2007 Never noticed anything like that on mine. Link to comment Share on other sites More sharing options...
joe chan Posted December 6, 2007 Share Posted December 6, 2007 My R9 back has the same problem - a slight creaking when pressing the back with a film in the camera. I think the foam around the film window in the back is pressing against the film canister and preventing the back from fitting flush against the body. It hasn't affected my photos so I'm not worried about it. Link to comment Share on other sites More sharing options...
steven_moseley1 Posted December 6, 2007 Share Posted December 6, 2007 Hi, Wear earplugs... Link to comment Share on other sites More sharing options...
elmar001 Posted December 6, 2007 Author Share Posted December 6, 2007 Thanks everyone. It just seems funny that an expensive camera would be built like that. My R4 bodies are very tight where the back fits, there is no flexing or movement whatsoever. I will just turn the stereo up a little, as they say. P.S. I did find that pushing the back UP makes it stop the noise. It must be rubbing along the bottom seal. L.C. Link to comment Share on other sites More sharing options...
weber_leou1 Posted December 7, 2007 Share Posted December 7, 2007 My R8 has the noise too when I press against the back on the left side of the body. <p> I fix it by putting some thin plastic materials into the seam line around the left side of the body like the picture <a href="http://tw.myblog.yahoo.com/weber_leou/photo?pid=2873">R8</a>. This make it tight when the back door is closed!<div></div> Link to comment Share on other sites More sharing options...
bob in seattle Posted December 8, 2007 Share Posted December 8, 2007 I use both the R8 and R9. If I press hard enough on the left edge of the door, I can ear a very slight noise. Never done this before in a quiet room listening for it, so never noticed it. I suspect Leica designed the door and frame tolerances to allow for positive latching without changing the shape of the door when it latches and the user releases pressure on the door. Not the same issue, but I did have to send my R9 in to Leica USA due to a faint light leak through the film cassette display window. They fixed it and CLA'd the body; it's been flawless since then. I've had no problems whatsoever with the fit or latching of the door on either body and have never really notice the "little noise" until I tried it, having read your post. I'm thinking that if your're getting good negatives from the body you're good to go until something starts showing up in your negs. Bob Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now