michael_kadillak3 Posted December 20, 2000 Share Posted December 20, 2000 Is it possible to repair a modest external ding on the outer barrel of a lens that caused the filter threads to be compressed slightly at one point or do you just have to live with it? <p> Thanks <p> Fumble Fingers Link to comment Share on other sites More sharing options...
n_dhananjay3 Posted December 21, 2000 Share Posted December 21, 2000 Yes, it can be repaired - a camera repair shop should have something that looks like a plier with a curved clamping end. Clamp around the filter threads and gently squeeze back into shape - sorry for the incoherent description - wish I knew what the tool was called. Good luck. DJ Link to comment Share on other sites More sharing options...
alpshiker Posted December 21, 2000 Share Posted December 21, 2000 I had fixed a cine lens that was very damaged (and bought cheap) years ago. I placed a cylinder of tender wood firmly in a vise and placed the outer ring of the lens on it and by tapping very gently with a tiny rubber hammer could straighten the thread well enough to use it. The cylinder of wood (from an old handle) should be cut slantwise to avoid touching the glass. But the previous answer is certainly safer! Link to comment Share on other sites More sharing options...
kevin_kemner Posted December 21, 2000 Share Posted December 21, 2000 Michael, <p> I had a lens with a similar problem. S.K. Grimes (doesn't his name automatically pop up when there is a repair question?) fixed it at a modest charge in less than a week. <p> Kevin Link to comment Share on other sites More sharing options...
sergio_ortega Posted December 21, 2000 Share Posted December 21, 2000 Michael, <p> This is a very straightforward and simple repair. It hardly seems worth the trouble of sending it off to be done by a repairperson. It does require the specialized tool already mentioned, and this tool can likely be purchased for less than the outside repair plus shipping/insurance costs. <p> Try the following: International Micro-Tools, 800-359-2878. Their on line catalogue is at: www.micro-tools.com. <p> Good luck, Sergio. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now