david_carlisle1 Posted August 8, 2007 Share Posted August 8, 2007 I have a Nikon F2 that I bought second hand. Nearly 2 out of 3 shots show a distinct double image on the right side of the photo. No other body I use exhibits this, and it happens with any lens I use. The photos have been taken around the 60th to 250th speeds. It is not blur as such, but a clear second image. Two technicians have examined it but can see nothing wrong. Has anyone else come across this problem? Link to comment Share on other sites More sharing options...
steve_levine Posted August 8, 2007 Share Posted August 8, 2007 A scanned example would be helpful. A guess would be an "advance" or a shutter malfunction. Something is hanging up. Link to comment Share on other sites More sharing options...
alex_lofquist Posted August 8, 2007 Share Posted August 8, 2007 Do you see this in the viewfinder? Link to comment Share on other sites More sharing options...
christiaan_phleger___honol Posted August 8, 2007 Share Posted August 8, 2007 Shutter bounce. Send it off to Sover Wong, World Expert in F2. Link to comment Share on other sites More sharing options...
david_carlisle1 Posted August 9, 2007 Author Share Posted August 9, 2007 Thanks Christiaan, Sover was one of the two techs who worked on it. He says "the shutter curtains simply cannot go back". Alex, no you can't see it in the viewfinder, the mirror is up while the shutter curtains are travelling. Attached is an example.<div></div> Link to comment Share on other sites More sharing options...
oskar_ojala Posted August 9, 2007 Share Posted August 9, 2007 This is a hard one. The double image effect seems to get worse towards the right edge of the frame. Can you keep the back open and look through it when making the exposures to see anything unusual? Did the techs have the film available and what did they check for? Link to comment Share on other sites More sharing options...
chuck_mathis Posted August 9, 2007 Share Posted August 9, 2007 David, Is the image a scan of the negative or the print? It looks more like a printing issue to me. The only way I can figure the camera would be an issue would be if the lens mount has been seriously whacked but then you would see the right side fuzziness in the viewfinder - I think. I've used some seriously abused Fs, F2s and ELs and haven't seen anything like that. Link to comment Share on other sites More sharing options...
david_carlisle1 Posted August 10, 2007 Author Share Posted August 10, 2007 Oskar, I've tried everything you can imagine like that, there is nothing apparent. Chuck, it's defineately on the negative. This actual roll I started in a Leica M3 to test a 40mm 'cron, then rewound to load into the F2. All the M3 photos were fine. This probem appeared on the first roll I used. I mentioned the problem to Sover Wong when I sent it off for a service. He offered to put a test roll through, and I declined, to save $10. Dumb eh? Sometimes, maybe one out of three, the shot is perfectly clear. I have FE FM F3 & F100 bodies and they never give me any trouble. I have not tried flash photos (no hotshoe) nor tripod shots. Before i shoot (waste) another roll I want to have a more clear strategy. Thanks for your response. Dave Carlisle. Link to comment Share on other sites More sharing options...
sover_wong1 Posted August 11, 2007 Share Posted August 11, 2007 Hi David, I'm certain it's not the shutter or shutter bounce, and I don't think it's the lens to film distance either, because some shots are OK. So it must be either camera or film movement during exposure. Here's a simple check to see if it is film movement : - Open the F2 without any film inside - Fire the shutter a few times and see if the sprokets move. It should not moves at all. (Occassionally there may be a VERY slight movement, AFTER the shutter has closed.) You can repeat the above with an outdated film loaded. Also, check the height of the film pressure plate. It should be about 4.5mm from the base to the top. The film is not actually pressed firm in the camera, as there is a small gap to allow it to move freely even with the pressure plate applied. A good practise is the rewind the film tightly every time you've loaded a new film. If it is not film movement, then it must be camera movement. Try some test shots with and without the camera mounted on a tripod. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now