sai_kit_ng Posted March 3, 2002 Share Posted March 3, 2002 Hi guys, I've problem to open the quickchange cartidge, how can I reset the counter? I'm the first time to load 45 films, I use rollfilm for my 45 gear in the past, and I would like to try 45, so where should the film node located? Pls. lead me the way it should be.Thanks. Link to comment Share on other sites More sharing options...
adam_gibbs Posted March 4, 2002 Share Posted March 4, 2002 Ng Sai Kit, if you are talking about the 8 sheet Fuji Quickchange there is some good info in a previous thread at http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl?msg_id=006LETshould answer all your questions. I have been using one for a few weeks now, great product. Be careful in cold weather though the septums can stick a bit. Link to comment Share on other sites More sharing options...
tim_atherton2 Posted March 4, 2002 Share Posted March 4, 2002 http://www.robertwhite.co.uk/accessories.htm#LabelQuickchange <p> I had a quick look at one - as i recall, you just reset it with a small screwdriver as mentioned her <p> tim Link to comment Share on other sites More sharing options...
john_hennessy1 Posted March 5, 2002 Share Posted March 5, 2002 To open the cartridge, I press down on the two tiny sliders on the end with the first and fourth fingers of my left hand while pushing off the end with my right thumb. To reset the counter I use my finger nail or any pointed object. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now