wing8 Posted April 25, 2007 Share Posted April 25, 2007 Does anyone know how to replace a bellows on an RB 67? Thanks, Jim Link to comment Share on other sites More sharing options...
randall ellis Posted April 25, 2007 Share Posted April 25, 2007 How bad is it? You may be better off patching it unless it is really trashed. You may be able to find a repair manual online, but it will likely be cheaper and easier to replace the body... - Randy Link to comment Share on other sites More sharing options...
paul ron Posted April 26, 2007 Share Posted April 26, 2007 Changing the bellows is fairly easy to do. Do you have the new bellows? Patching em is not the way to go. The liquid electric tape trick makes a mess unless you are only patching a couple pin holes. If the bellows are worn at the corners or dry rotted, best bet it to get a new one. automax1@juno.com Paul, NYC The more you say, the less people listen. Link to comment Share on other sites More sharing options...
wing8 Posted April 26, 2007 Author Share Posted April 26, 2007 Hi, they are crunched bad enough to interfere with the mirror at no extension. I got it from KEH cheap and a new bellows on that auction site. So, I just need to know the replacement procedure. Thanks, Jim Link to comment Share on other sites More sharing options...
paul ron Posted April 26, 2007 Share Posted April 26, 2007 From the inside of the camera, there are 7 small crosspoint screws holding it onto the front frame lens mount. There are 4 small crosspoint screws holding it to the body visable from the outside of the camera. Did you also get the gaskits with your bellows? Have fun! The more you say, the less people listen. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now