nico_d Posted May 7, 2006 Share Posted May 7, 2006 I'm doing a project for school where I'm projecting slides onto polaroid film. When I got to the camera store, there was no SX70 film to be found, which is what I was planning to use for this (expose under the enlarger, then put it in my SX70 camera to expell the picture through the rollers). The problem is that the salesperson convinced me that I could do projection printing onto 669 film and so I bought some. I have no camera or Daylab that can hold 669 to break the chemical pods and start developing? Once I expose on 669 film, can I try to manually break the chemical pods on the polaroid to start developing? The camera shop won't refund the 669 film (pack of 20 exposures, cost a lot). Could 600 or Spectra films work for projection printing from slides? Link to comment Share on other sites More sharing options...
pauljm Posted May 7, 2006 Share Posted May 7, 2006 Hi Nico You cannot manually develop 669 pack film, only the rollers contained within a camera back or Daylab/Vivitar slide printer will do this. There's also a big difference between SX70 and 669 manipulations. The Polaroid web site has quite a lot of information on both techniques. I suggest you look for a cheap Vivitar slide printer on ebay which will take the 669 pack film and keep searching for some SX70 film for use with the enlarger. Both techniques can create stunning images. Good luck. Paul Link to comment Share on other sites More sharing options...
todd peach seattle, washi Posted May 7, 2006 Share Posted May 7, 2006 I'm ignorant of the details so I'll ask: What's so special about the rollers in a daylab? Wouldn't an ordinary laminate roller from Home Depot and a hard surface do the same thing? If you're not familiar with a laminate roller, it's a hard rubber roller that's used to smooth down laminate (e.g. Formica) on a counter top during the gluing process. They're very sturdy, as one usually bears down on them about 100 pounds worth. Link to comment Share on other sites More sharing options...
nico_d Posted May 7, 2006 Author Share Posted May 7, 2006 Todd- a good question that fits in with my original one. If I can used a rolling pin or something to break the chemicals on Polaroids, will they develope evenly? Link to comment Share on other sites More sharing options...
pauljm Posted May 8, 2006 Share Posted May 8, 2006 Ultimately there is no reason not to try a hard roller/brayer but I'm almost certain that it will not spread the chemicals evenly. You must also be aware that the developer is quite caustic and can irritate or even burn the skin if exposed to it. Using the internal rollers elimintaes some of this risk. I also forgot to mention that www.kathleencarr.com is also a very good for gaining an insight into Polaroid manipulations. Paul Link to comment Share on other sites More sharing options...
ben_hutcherson Posted May 8, 2006 Share Posted May 8, 2006 You can pick up a camera that uses pack film at a yardsale or flea market for a few bucks, and not only will you have a properly made set of rollers, but also probably a great useable camera. Just pop open the back and make sure the rollers turn freely and aren't rusted or gummed up with developer goo. By the way, Polaroid recommended cleaning the rollers after every pack of film, and that's still an excellent suggestion. For a user camera, I like the 250. It has a nice glass lens plus a Zeiss-Ikon combined viewfinder and rangefinder coupled to the lens and that folds down into the body when not in use. For your purposes, even one of the rangefinderless plastic lens one will work, but I'd suggest buying a nicer one if you can find it. Even a 250 should be less than $10. Link to comment Share on other sites More sharing options...
gisele_pungan Posted March 20, 2008 Share Posted March 20, 2008 Do someone want to buy 2 twin packs of polaroid 669 films? I've bought then by mistake, they don't fit on my polaroid 600 camera. If someone has polaroid 600 or 779 films and want to exchange them with me, i would be glad. :) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now