joachim_hildebrand Posted February 22, 2005 Share Posted February 22, 2005 I just bought a F 1N in very good cosmetical condition but it does notwork like should and like it did in the shop. The problem is now:Shutter lag seems to be quite long, mirror travel is very slow and themirror often goes down again only when I lift my finger from theshutter release button. In complete manual mode without batteriesthere are the same symptoms but not as severe because the mirrorsreturns always but slower then normal. Yes, I tested the battery, theneedle is quite above the minimum mark at 5,6. Should I bother withrepairing the camera or just return it to the shop an look for anotherbody? Is it a typical problem? Thanks Joachim Link to comment Share on other sites More sharing options...
graham_evans2 Posted February 22, 2005 Share Posted February 22, 2005 Sounds like it's time for CLA. If not included in the CLA, have the light seals and foam mirror stop replaced as well. Any model or brand of camera this age is more than likely to need a CLA. Perhaps further negotiation of the purchase price is possible? The F1N is a great camera, very well made and very reliable. If yours is in good cosmetic condition then it's certainly worth the expense of a service. Link to comment Share on other sites More sharing options...
brian hanson Posted February 22, 2005 Share Posted February 22, 2005 To answer that question I would need to know how much you paid for it.They are great cameras. Link to comment Share on other sites More sharing options...
chris_waller Posted February 28, 2005 Share Posted February 28, 2005 Joachim, I stowed one of my F1s in a drawer in an unheated upstairs room for several months. When I came to use it again it did just what you describe. It may just free up on its own with a little use, but I advise a CLA. Link to comment Share on other sites More sharing options...
joachim_hildebrand Posted March 4, 2005 Author Share Posted March 4, 2005 Thanks for Your help. I returned the camera to the shop which repaired it at no cost. They said the problem was stiff lubricants in the mirror mechanism because of the long time of no use. Now everything works flawlessly. I like this camera very much, found a 1,2/55 ASPHERICAL SSC and an 1,2/85 L and now I look for the 1,4/24 L. The only thing I don?t like: There is no exposure lock in AE Mode, at least i can?t find one. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now