rolleiflex 2.8 with rolleinar 3.....

[diego_alonso]

hi to everybody, i have two questions, i just bought a rolleinar 3 for

my rolleiflex without light meter and would like to know the right

position (ther are one bigger than the other) to place on the view

lens and the taking lens, and how much do i have to compensate the

exposition if i have to do it.

Thank you very much.

[gonzalo_echeverria]

hi Diego,

 

i use rolleinar i and ii with my 2.8c and have not noticed any exposure drop with them. exposure compensation is required when the taking lens starts to increase in distance from the film plane.

 

the bigger one is the viewing/parrallax correction lens and it goes on the viewing lens ( top ). the red dot on the 'rim' goes in at approx 8 o'clock and turns clockwise until it reaches the 12 o'clock position. the other lens goes on the taking lens ( bottom ) and doesn't require orientation. hope this helps. gonzalo.

[diego_alonso]

Thank you very much gonzalo, very helpfull.....

[mskovacs]

There is some additional info <a href="http://rurmonas.cust.nearlyfreespeech.net/manuals/rollei-prac-acc-54/rollei-prac-acc-54.html">HERE.</a>