tim_klimowicz Posted July 14, 2004 Share Posted July 14, 2004 Just got a beautiful Vivitar Series 1 70-210 FD lens from someone onebay - only $46!!! While building a lens case out back with a heavy cardboard mailingtube, I accidentally dropped the lens on a carpet-covered wooden deck.It hit with a heavy thud. Now when I shake it slightly, I notice thesound of something loose, wiggling inside, which wasn't there before. I just attached it to the body and gave it a test - focus & zoom stillworks fine and smoothly, and the aperture works just fine all the wayfrom 3.5-22 and auto (well, I assume the auto still works heh). What could be making the sound? It sounds very light and metallic -like a spring, perhaps? Could this be a problem later on if I don'tget the lens checked out? Thanks,Clumsy in Queens.... Link to comment Share on other sites More sharing options...
John Crowe Posted July 14, 2004 Share Posted July 14, 2004 Did you actually test the aperture or just the adjusting ring? Put it in stopped down mode and see if the aperture is adjusting all the way through. Link to comment Share on other sites More sharing options...
tim_klimowicz Posted July 15, 2004 Author Share Posted July 15, 2004 Yeah, that's what I meant - I put it in DOF preview mode and went thru the range, and they worked just fine (of course, can't tell for sure with the auto mode - it looked the same as f/22). The good news is that the ghetto lens case came out great. I just hope the lens isn't permanently damaged (somehow).. Link to comment Share on other sites More sharing options...
richard_oleson Posted July 15, 2004 Share Posted July 15, 2004 Give it a try and see how it performs. It's possible that you're just hearing some linkage inside that you hadn't noticed before because you weren't listening for it. It's also possible that you broke a zoom cam off or something more serious; but if this is the case, it probably can't be repaired for the replacement cost anyway so you might as well get as much use out of it as you can..... :)= Link to comment Share on other sites More sharing options...
mcgarity Posted July 15, 2004 Share Posted July 15, 2004 I would suggest you set your camera to full manual with a two second exposure time, open it up and look through the lens from the rear as you manually trip the shutter at each aperture setting. It is quite possible that a lens will step down using depth of field preview mode but not do so properly when you try to take a picture in any other mode. I don't know how prevalent it is but I once had a lens malfunction that way. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now