Zone Sticker for Soligor Spot Sensor II (Analog)

I'm trying to find a Zone Sticker for the calculator dial on a Soligor Spot

Sensor II (Analog). I understand Zone VI used to offer one (Part #ZN6530?), but

Calumet says they're no longer available. Any ideas?

Make your own.

This one? http://www.largeformatphotography.info/articles/ZoneDial.pdf

There are some and other useful templates here downloadable as pdf's :http://www.darkroomagic.com/ It's in the LIBRARY section.

That one in the PDF above is for the Pentax; not sure if it'll fit the Soligor correctly but it's probably worth a shot.

 

You could get Fred Picker's "Zone VI Workshop" (a classic!) and copy the one pictured in there, either on a copy machine or on a scanner. The scanner would allow you to re-scale until it's sized just right.

 

But, as mentioned, you could make your own. Beware though of making one on an inkjet printer, as the ink will run if it gets wet (maybe some Scotch tape over it?).

While I do use a Pentax with the ZoneVI sticker I find that I dont use the scale any more. I am used to metering the shadow and stopping down 2 stops to get a zone 3 exposure. With the highlights I meter and stop up 2 stops to get zone 7. With time I no longer look at the grey scale.