sanbrewer Posted September 17, 2020 Share Posted September 17, 2020 (edited) Hi everyone! I bought my first Hasselblad, a Hasselblad 500 elm, and I made a battery adapter for it and connected it. the motor just spun and spun and i disconnected the battery. Put the operation lever on L, disengaged it to O and then connected the battery again, then it stopped and didn't move. Ive tried shooting it, the darkslide pin does come out, but the mirror doesn't go up. My friend tells me that it wont shoot without a lens, but i doubt that. when I connect the battery it hums a bit (cause i felt it while holding it) Is this something that I would have to open it up for? any advice would be greatly appreciated! Thanks for reading Edit: I found out more, I wound the gears back so that it could wind it, and the gear that's supposed to engage with the back rotates for a bit and then suddenly stops if that makes any difference Edited September 17, 2020 by sanbrewer Link to comment Share on other sites More sharing options...
q.g._de_bakker Posted September 18, 2020 Share Posted September 18, 2020 That camera needs a repair. If you can return it, do so. There are many 500 EL/Ms for sale. Link to comment Share on other sites More sharing options...
dan_lindsay Posted September 20, 2020 Share Posted September 20, 2020 The Hassy of course shoots without a lens mounted. It also shoots without a magazine installed. These are fairly simple objects and are not difficult to get in synch. (I have a 500 EL/M and a 503CW. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now