Jump to content

4x5 View Camera Photographers Who Use Roll-film


charles_mangano

Recommended Posts

1. Which roll-film format(s) do you use and why?

2. If you use more than one format,

a. Which one do you use most often and why?

b. How do you decide which one you will use for a particular image?

c. Do you use a different holder for each format or a multi-format holder?

3. Do you:

a. remove & replace the GG to use a roll-film holder,

b. use a slider/rotary back to more quickly switch between the GG & the roll-film holder,

c. or use a slide-in roll-film holder and why?

Thanks,

Link to comment
Share on other sites

1. 6X9----because it is directly proportional to 70mm which my stock

agency dupes to. One drawback to this format that I have found is

the amount of cropping that needs to be done if dealing with a

calendar company that produces "square" calendars.

 

<p>

 

2. N/A----I would consider the 6X7 as my second choice.

 

<p>

 

3. I also use the Horseman. Removing the GG on my Wista is easy to

do. The Horseman holders have excellent reputations and in 5 years

of heavy use I have never had a problem with mine.

Link to comment
Share on other sites

I use a 6x9 (Toyo) and a 6x8 (Graphlex). I prefer the 6x9 since it

gives me the wider angle of view. I have never cared for the 6x7,

among the reasons is that 10 exposures per roll is difficult to file

and make contact sheets.

I remove the ground glass with both holders even though the Toyo is

designed to slip under the glass. It is very thick and the force

required to insert it may knock my old camera out of alignment.

Link to comment
Share on other sites

Charles -- I occasionally use 6 x 9 roll film back, especially when I

expect to make a 11 x 14 print. I may have roll film back loaded with

color negative film when I prefer a lower contrast image, while I

mainly use higher contrast transparency film with 4 x 5. I have never

experienced light leaks with roll film back, but on occasion I do lose

Quikload/Readyload shots because of light leaks incidental to

accidental bending of film as I shove the film back into film holder.

 

<p>

 

Regard

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...