Manuals - CP31 Dryer and Replenisher

<p>Hey all,<br>

I recently purchased a Fujimoto CP-31 for a home color darkroom. Along with it came a dryer and a replenishment unit. I have a manual for the processor itself, but does anyone have a scanned copy of the manuals for the dryer and replenisher units? I can't seem to find them anywhere online.<br>

Any help would be MUCH appreciated.<br>

Cheers,<br /> -Matt</p>

<p>Matt, I have the manuals but I believe there are sources online. I will look around and scan/copy if need be. These are still supported, there's a guy that works for the company that supports/imports them who posts on APUG.org regularly. I will see if I can dig up the info. They likely would send you manuals if need be, they've sent me parts diagrams in the past.<br>

Good luck, its' a great unit! I have 2 of them, complete with dryer and replenishment unit.<br>

Basically the dryer just is synced to the main unit via the din-plug cord, and coupled via the flexible connector. It wants a water supply (not too high pressure) and a drain. I run mine with a pump and recirculation since I don't have a drain/supply set up at the moment.<br>

The replenisher wants a sync connection the same way, and has 3 input/output lines for the 3 pumps. There's a manual switch for it too and an adjustable potentiometer inside to set replenishment rates. for RA-4 running mostly 8x10s I have mine set to 2 (out of 7) on the dial and it works fine that way. no more higher setting needed, I don't think.<br>

Enjoy,<br>

-Ed</p>

<p> </p>