Recall on Kodak Portra 160NC Emulsion #4371

I received two rolls of Kodak Portra 160NC film (36 exposures) from

B&H last week. Luckily, before I used them, I came across a posting

here to the effect that there was a recall on this emulsion. I

contacted Kodak, and here's their reply:

***************

Hyun Yu,

Yes, I am sorry to say that em. #4371 is the effected product and

apologize for any inconvenience this may have caused you. Please be

aware that this was only the case with the individual 135-36 roll

product, cat. #890-6067, and the 5-roll propack and other sizes of

this film did not have this misaligned edgeprint. If the film that

you have is from this batch, please contact the dealer from which you

purchased the film to arrange for the product to be replaced.

If you should have additional questions, please be sure to revisit

our site as we are continually adding information to enhance our

support.

For immediate answers to commonly asked questions, please visit:

http://faqs.kodak.com/kodakprofessional

For product and technical information, service, support, and

downloads:

http://www.kodak.com/go/professional

For information on ProPass Magazine:

http://www.kodak.com/go/propass

Regards,

Kodak Information and Technical Support

Kodak Professional

Ph. 800-242-2424