john_mcferren

<p>Sorry I didn't get back to you sooner. How did this work out, if you are still having trouble and haven't changed the bulbs, hold down the start switch with the cover off and look at the ends glowing. Hold it down for about three seconds and see what colors the ends are glowing. If they are glowing white with or without an orange tint you are good, if they are glowing orange with no hint of white on any end release the switch and see if the tube lights and is steady (if not try a replacement). If the ends don't glow at all, try wiggling the switch when held down to see if that starts glowing, if not then replacements are absolutely necessary.</p>

<p>For scanning simply treat a Polaroid like a print (except Polapan and Polachrome obviously). For Instax 600 dpi is about the highest resolution you need to scan.</p>