Jump to content

laurencecochrane

Members
  • Posts

    259
  • Joined

  • Last visited

Reputation

125 Excellent

1 Follower

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Nice dog and welcome. And I like the pic. Do not criticise yourself too much. Just keep working on it. Post some pics on here to get feedback. Personally I have seen some horrific stuff posted that were only fit for the recycle bin. Do'nt worry too much post them. But critique them yourself first before someone else does.
  2. Liquid electrical tape I have never used the stuff only read about it being used on bellows I recalled seeing it on ebay UK so I just checked ANY AMOUNT OF IT.
  3. Certainly no expert but I have read liquid electrical tape works well. Worth a try.
  4. The lingering smell Joe ? Did you ever meet a pig farmer on a night out ? Not difficult to know their ocupation. SORRY PIG FARMERS NOT PERSONAL.
  5. Do'nt know Joe. THERE ARE PEOPLE OUT THERE WHO SPRAY IT ON THEIR JOINTS !
  6. Should not matter too much Joe as its on the cameras film back nowhere near optics or shutter blades. is the back door removable on the C330 ? As is is on the C3 C33.
  7. You are right in what you say. But WD certainly leaves an oil film behind. Dedicated water displacer or not. I use it in the intent as much to clean as lubricate. Certianly sorted my old F1 completly even tho it was DODGEY AS HELL.
  8. Just want to wish you the best of luck. With my REALLY DODGEY PIECE OF ADVISE. Not the sort of advise I like to give out. BE SOOOO FXXXXING CAREFULL in doing it, Optics or shutter blades will not tollerate.. STAY WELL CLEAR OF. Again good luck.
  9. I know it sounds CRUDE EVEN A BODGE Which on a camera it is. As 120 220 set is only in the cameras back film door I would give a squirt of WD40 on it. This should not really be done. I used it once on a Canon F1 non functioning meter set needle. It worked EVEN THO I SHOULD NOT have done it. Had to spray up inside cameras internals. it did work 100 %.. Heard of others doing the exact same on other camera mechanical faults sucessfully. I have done it sucessfully on other cameras too. DISCLAIMER ! PLEASE DO NOT SAY I RECOMENDED IT. OR EVEN BLAME ME. It can go wrong. Extreme care needed !
  10. Back in the day it ws common to way overengineer products SOME even designed to LAST FOREVER. This is rarely done today. HOWEVER some materials used in manufacture today are FAR SUPERIOR to what was availible back in the day. I get critisized often for useing modern components tech on on old cars / machinery. Some folk go nuts when they see an alternator on an OLD CAR. Me ? Do what you have to do to make it work or work better.. So it can be practically used as it was intended to. NOT JUST A SHOW PIECE.
  11. Right Two clicks is C3 C33 Never owned a C330 so no notion.if C330 is two clicks or one. but indeed they can just sound like one. The only theory I had was an incorrect pressure plate film selection. So right out of ideas SORRY !
  12. The standard PC is really quite common even still found on some modern digitals. My Bronica SQA, Mamiya RB67 Canon A1 Canon F1 New My former Canon F1 and FTB. More modern Canon 7D MkII Digital Even My Mamiya C33's three lenses on which the PC's are of a totally different design to most other cameras still is standard PC Same as my other current and previous cameras.. Not saying there are no different PC sockets / cables. There are. It does not look like the Yashica auto is any other than std PC. I do know some Yashica models use a different screw on PC cable plug . Personally not seen one apart from on some on YouTube vids. Go to a GOOD camera shop ask there maybe ask to trial fit a standard PC.
  13. Hi I had to look up Yashca Auto on ebay for a pic of one as TOTALLY UNFAMILIAR WITH THE AUTO. I had a 635 LONG TIME AGO ( 1980's ) It was standard PC socket. The pic I looked up looks very much like a standard PC socket. Is yours different ? I dont know !
  14. Sure your pressure backplate aint set to 220 ? I realise the camera is new to you and settings usage a bit unfamiliar. Read your handbook Download one if need be. I sold a C33 on ebay a whie back buyer said film counter was faulty. On return I discocovered camera functioning perfectly. The IDIOT buyer had not closed the film door properly. DID NOT READ THE HANDBOOK I SENT with the camera. Which clearly states Film door MUST be closed FIRMLY with TWO clicks. Get a handbook and read it please.
  15. Add on to my last post When I bought my ebay RB Pro S It had broken shutter release it was jamming in HARD.. I could well have sent it back however the components ALONE were worth more than I paid. There were lenses with the camera one a portrait tele. No less than the highly desirable later KL varient. KL's can be £300 alone, and this one is in pretty decent nick, never mind the value of the other lenses the prism the film back the rotating plate even the ground screen. All those bits added up to more value than I had paid. I hunted ebay and bought a working but for parts Pro S. body. Side trim was present but not attached EASY FIX. Leatherette was missing off the RH focus knob. I removed the leatherette off my broken RB focus knob then stuck it on the ebay parts one. I glued back on the side trim reprayed the bare alloy at the top edge of the ftont lens mount panel. I HAD NOW A DECENT FULLY WORKING RB. The ebay parts body I paid £70 for I then sold my own broken body on ebay for £50. That is a £20 fix of a buggered camera and the outfit worth more than I had paid for the busted one and extras originally
×
×
  • Create New...