Jump to content

monica_alonso

Members
  • Posts

    8
  • Joined

  • Last visited

Reputation

0 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Yea makes sense , the temperature on my chemicals are on the lower side so I’ll just shoot for higher developing time . What about for stop bath does that increase also ? I usually do 30 seconds when developing tmax 400 . And fixer I’ve heard I could extend also which I do around 6-7min
  2. Yea I checked that chart but I am worrysum The xtol is diluted it’s not straight . I looked up some suggestions and they are just all over the place from the chart saying 7min to people saying 20-30min the differences are extreme not sure what to do
  3. Yea I checked that chart but I am worrisome about the time they put which is 7 min the same amount of time I use for tmax400 and for illford hp5 , I have read peoples responses on forums etc that day 20min , etc a drastic difference I’m not sure what’s accurate I haven’t developed 3200 before also do you know what it means when they say stock vs 1:1 ratio ?
  4. What are good times to develop bw delta 3200 using Kodak xtol ? Indoor concert lighting and no flash f2 1/500
  5. Hi yea so I listed down below the results of the point and shoot with flash on . I’m trying to see what the out come would be with my Minolta slr without flash I haven’t tested that yet , even if I could meter on stage etc the lighting is so unpredictable with strobes and flashing lights etc , I was trying to see if anyone has shot like this before etc . I’m going to just open the lens much I can and doing maybe 1/125 or 1/200 . Would that make sense ?
  6. I’ve shot a couple shows already with tmax and delta 400 with a point and shoot , I have many slrs and tlrs but wanted something easy and fast considering the hardcore and metal shows I go to are very difficult to shoot considering movements getting pushed lights etc but I haven’t tested how it would turn out if I used my slr with no flash , the lights are not steady a lot of strobes flashing movement of lights it’s almost impossible to meter those conditions but wanted to see if anyone had already tested this , it’s definitely a trial and error for me at this point then . These shots are with a Minolta point and shoot
  7. I am shooting indoor concert pics using BW no flash the lighting is very unpredictable a lot of flash lighting strobes etc movement etc . I typically use HP 5 or tmax 400 and at times tx400 . I believe 3200 is a choice also but have not tried it indoors no flash . I typically use a point and shoot with flash and results are ok but sometimes flash isn’t allowed certain places. Also what fstop and shutter speed should I be using
  8. <p>Hello,<br> I am curious to know if it is effective to process c41 film with balck and white chemicals/process? what is the result and is it worth doing?</p> <p>Thank you</p>
×
×
  • Create New...