b_c16

<p><img src="http://i490.photobucket.com/albums/rr261/bc808hi/Yashica%20Electro%2035%20GSN/display_arrows_adjustment.jpg" border="0" alt="Yashica Electro 35 Display Adjustment Screw" /><br>

Richard thanks for helping me with this. Also many thanks to Russ over at camerarefurb.com he sent me this email he wrote... "It's the one labeled 'Sliding Adjustment for Focus and Position of Warning Lamps'. If you loosen this screw slightly and rotate the lamp assembly toward the rear of the camera, it will move them to the left in the viewfinder. Just fiddle with it until it is where you like it. If they appear too high in the viewfinder, you can carefully bend the assembly down somewhat." -Russ, Camerarefurb.com. I did what Russ said to do you can go only so far as the display bracket will hit the inside back of the camera cover. I adjusted mine fully to the rear and now my UNDER yellow arrow is where I can see it just above the top right hand corner yellow bracket mark. It's close as I can get it to where it's suppose to be. But it doesn't look like the manual's pictures of how the display marks should look like and I'm not sure what else I can do to center it over the top of the parallax mask marks. Any suggestions?</p>

<p>Thanks Richard for responding to my question. So your saying that's how its suppose to be the OVER arrow (Red) is located about center top of your viewfinder and you have to change your eye position to see the UNDER arrow (Yellow) right side top? Huh, I thought something was wrong with the GSN maybe that's how it's suppose to be?</p>

<p>Hello... Question does anyone know if there is a forum on adjusting the arrow mask that appears above the viewfinder? Or can anyone tell me how to do this? My GSN for some reason the OVER arrow is about center top of the viewfinder and the UNDER arrow is off to the right of the viewfinder? You have to adjust your eye angle to see it but it's there. They both seem to light up when they should. I've already removed the top and have downloaded the service manual for the Yashica Electro 35 GSN. But need to be pointed in the right direction. For those who may have the manual is it on page 32? Which adjustment screw? Thank you for your time in this matter.</p>

<p>Question does anyone know if there is a forum on adjusting the arrow mask that appears above the viewfinder? Or can anyone tell me how to do this? My GSN for some reason the OVER arrow is about center top of the viewfinder and the UNDER arrow is off to the right of the viewfinder? You have to adjust your eye angle to see it but it's there. They both seem to light up when they should. I've already removed the top and have downloaded the service manual for the Yashica Electro 35 GSN. But need to be pointed in the right direction. For those who may have the manual is it on page 32? Thank you for your time in this matter.</p>