bal_zs_bir_

<p>the probelm solved couple of weeks ago, the lamp has an electronic problem, the manufacturer repaired and changed everything, thanks to RobertWhite Photographic assistance</p>

<p>the shop finally replied, it was a small glitch in the mail system, anyway, they are now looking into it, they r very helpful</p>

<p>Thank you David, I already let them know about this, but unfortunately I didn't get any reply back, I'm going to send another mail to them....I'm in the middle of Europe, the shop is in UK</p>

<p>well, sometimes the modelling lamp just suddenly switch off....some kind of electronical issue....I don't know, I'm trying to get contact with Robert White shop, but I couldn't get any answer yet, I bought it there, and I used three times. If this is an electronical issue I'll be really disappointed in Elinchrom.....</p>

<p>the tube is seated correctly</p>

<p>Hi,<br /> on the lamp, the test button doing nothing, it means no flash, but it starts to recharge and beep comes when it's ready, wierd...<br /> I also tried the wireless trigger which comes with the kit, the same, no flash, but recharge, beep when ready<br /> with wired to camera I did not tried it so I will first thing in the morning (I have a job someehere, typical when you have a job to do, suddenly happening something like that)</p>

<p>again, no error code, the green led next to the test flash working just fine....</p>

<p>Hello,<br>

I bought a bx 500 ri kit, it was ok until yesterday. I'm not sure if something faulty inside of the lamp, but one of the head simply just not firing the flash unit. It charges, no error message, the green lights next to the buttons are on, so it looks like everything is normal. The flash tube is not broken, because I changed it with the other head from the kit and it was working just fine in the other head. I thought this is some kind of configuration issue, but I tried to find what is that I changed. Nothing.....btw, the modelling lamp is also working just fine....<br>

please help out with some idea, and yes I know, I should go to a repair shop, but I'd hope that only my mistake causing this issue...</p>

<p>Hi,<br>

Could you help me with a question about Phase One adapters? I couldn't find adapter for RB67 Pro SD which will for with Phase One H20 for example. Only RZ67 adapters that I did found. Which adapter could help me to connect an H20 to a Pro SD? Thanks</p>

<p>Thank you Greg, I'm trying to find out which would be a better for me. Normally, I don't like middle solutions, but a bigger digital back would cost me thousands of dollar....I'm still thinking and reading :) What kind of camera are you using with the H10?<br>

Thank you for your input</p>

<p>Guys, have I only these three options if I'd like to buy digital back for RZ or 645AFD? Leaf, Sinar and Phase One? Thanks</p>

<p>Hello there,</p>

<p>I'm looking for some information the little Phase One digital backs, H5 and H10.<br>

Peter, can you share your experience with me about the H10? What do you think about the H5?<br>

Thanks</p>

<p>Hi,<br>

My guess is the 60D, nothing like 7D....it is a hoax, but we will see.</p>

<p>I bought it in UK, and the AC cable was in the package. A normal AC cable which you use for the PC is ok</p>

<p>Well, in the 500 BXRi kit, the modeling lamp is 100W</p>

<p>Well, I think a 1200FX would to much for a third light, but depends on the dimension of your studio</p>

<p>Hello,<br>

I have a short question, sorry if this isn't the right topic for that.<br /> The Bowens and Elichrom monolights could work together? I mean the different brands can recognize the signal of the others?<br>

Thanks<br /> Balazs</p>