Jump to content

emmanuel_b1

Members
  • Posts

    55
  • Joined

  • Last visited

Everything posted by emmanuel_b1

  1. Hi there, I have 2 Contax bodies, one AX and one 167MT I have one flash Metz 40MZ-2 and its SCA-3802 adapter. Everything connected in TTL or whatever mode, the change of the aperture on the body doesn't affect the aperture shown on the flash screen I'm quite sure it was the case before but I cannot remember the way Any support appreciated, thank you!
  2. <p>Hi there,</p> <p>Who knows how to solve the too usual grease issue on an EOS100, like this:</p> <p><img src="http://www.parlonsphoto.com/upload/images/photo-sb82vr.jpg" alt="" width="800" height="534" /></p> <p> </p>
  3. <p>Hi there,<br> I don't remember.<br> Generally for using TTL flash unit , is it necessary to setup the flash with for example aperture and iso?<br> In my opinion, it should not be.</p>
  4. <p>Playing with free play between lens and body solves the issue, but it doesn't stay like this a long time.<br> I need a long term solution.</p>
  5. <p>>Your MT167 seems to be out of adjustment and requires some very basic service.<br> I am interested to know how to do it.</p>
  6. <p>Hi,<br> I just purchased a beautiful MT167.<br> I own already an AX and another MT167.<br> I own as well two 50mm f1.4, one 135mm f2.8 and one 28mm f2.8, all from Zeiss.<br> The issue I have with the latest MT167 is that f number is shown different on the screen than it should be, difference is more or less 1/2 diaph.<br> For example the ring is set to f16 and the screen shows f19; at the opposite side it shows f1.7 when the ring is set to f1.4.<br> This happens on 3 of 4 lenses.<br> None of the other bodies has this problem.<br> I think about a small body gap somewhere.<br> Anyway, does it change something on the shot condition, or is it just cosmetic on the screen?</p> <p> </p>
×
×
  • Create New...