Jump to content

joanthon_perino

Members
  • Posts

    1
  • Joined

  • Last visited

Posts posted by joanthon_perino

  1. Eugene,

    A true scanning device will set you back at least $1500 USD.

    The Workprinter by Moviestuff.tv is an example. We tend to feel that all the advice about Goko and other less capable things such as Buhl or a Laird multiplexer is a bit mythical since they are as rare as hens teeth. No matter what device you try to obtain or do get you need to be aware of a few things as none of it is straight forward or simple as some make out and the results may satisfy those who think they have a great set up using VHS systmes. VHS systems are fine on most PC's however if using DV you better look at the expense involved for RAID and a decent CPU and high end video card.

    If you have a small amount of film take it to a pro for scanning, they know what they are doing and have ALL of the gear and software that works and the know how to give you a great result.

    Nothing is simple and requires not only hardware and MONEY, but knowledge skill and ability, why? you have only started to look at the sharp end of the stick, there is so much more to it than instamatic point and shoot including videoscope analysis colour balance since film is so different from video, then there is contrast range, saturation and authoring a DVD seems simple, but with film, frame rate and camera capability is just part of the equation. I could go on but I really think I have said a lot.

    If you are looking for the challange and satisfaction of doing it your self be warned the learning curve is steep, some get lucky and obtain acceptable results. it is rewarding and very stimulating challenge.

     

    Good luck

     

    Jonathon

×
×
  • Create New...