Jump to content

terry_dent1

Members
 View Profile  See their activity

  • Posts

    366

  • Joined

  • Last visited

 Content Type 

Everything posted by terry_dent1

  1. terry_dent1
    I was in this situation a Hasselblad sent me a new foot for the camera free. BUT this was about 20 years ago.
  2. terry_dent1
    Also check your film back. Might have a loose light seal that is sometimes falling into the film plane area.
  3. terry_dent1
    I think it's a flap of material that lines the inside of the camera body that may have come loose. Remove the back and the lens and cycle the camera several times while looking through it and see if you notice any obstructions. I think a shutter problem would appear square with the frame which this isn't.
  4. terry_dent1
    I have done this in a unicolor 8x10 drum and it works well. I can do 4 4x5 or 2 5x7 at a time. I use 300 ml of chemicals and develop using the film chart time minus 15%.
  5. terry_dent1
    <p>SWC/m uses Hasselblad series 63 filters. The thread on the lens is for the retaining ring. These filters have no threads. The 903 series of super wides use the bayonet 60 filters.</p>
×
×
  • Create New...