oscar1 Posted September 2, 2003 Share Posted September 2, 2003 Hi, I have received an old Hasselblad 500C body and I have some questions about it: When I press the shutter, both rear curtains open but they are not completely parallel. The upper one in falling a little. When I look through the back it seems that the curtain does not interfere the light but it is very near to interfere. Is this normal?. Also, when I use the pre-release, I have to move a little the advance knob in order the pre-release to work. Is this a malfunction? Sorry for these simple questions, but I am new to the Hasselblad world, so any advice will be of great help. Thanks in advance and kind regards. Link to comment Share on other sites More sharing options...
peter_rosenthal Posted September 2, 2003 Share Posted September 2, 2003 Oscar- Your 500C needs some work. The top door should be tucked up to the mirror during exposure. While it may not interfere with the exposure now, there is a good chance it will in the future. Your other problem is a maintainance issue as well. It sounds as if the tolerances in the mechanism are no longer overlapping. It's typically called a CLA. Clean, lube and adjust. Nothing serious, just standard, predictable stuff. Peter Rosenthal - PR Camera Repair, Flagstaff, AZ - 928 779-5263 Link to comment Share on other sites More sharing options...
oscar1 Posted September 2, 2003 Author Share Posted September 2, 2003 Thanks a lot, Peter, for your fast and kind answer. I will take this baby to a CLA to return it to original specs. Regards, Oscar Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now