clives Posted December 6, 2005 Share Posted December 6, 2005 Anyone else have problems using a 2500D flash on their 7D?? Purchased 7D in August..taken 9,600 images since. GREAT camera. Great images. I am a happy guy. However, it came with a 2500D flash and I've not used the flash much. It did not seem to be working properly (erratic) so my dealer gave me a new one a few weeks back. Seemed okay at first, but again, I only used it once or twice. Yesterday, I got it out and took a lot of pictures to test it. It simply does not work properly. With exactly the same setup and settings, the images are overexposed and underexposed..all over the map. (If they were all one way or the other, I could take corrective action ... but the exposures are all over the place.) Batteries are fresh. I am NOT using D lenses, but the flash should still work with Maxxum lenses. Had flash set on TTL and camera is defaulted to pre- TTL. I've tried all combinations (even without D lenses) including ADI settings. Nothing works including the recommended settings. I am taking it back to my dealer and going to ask for a discount on a 3600HS(D) or a 5600HS(D). (KM pulled out of Canada so getting service is going to be tricky. My dealer is real good tho.) Anyone else have these problems? Thanks, Clive Link to comment Share on other sites More sharing options...
michael_hohner Posted December 6, 2005 Share Posted December 6, 2005 Which firmware version does the camera have? Link to comment Share on other sites More sharing options...
clives Posted December 6, 2005 Author Share Posted December 6, 2005 1.10u Link to comment Share on other sites More sharing options...
clives Posted December 6, 2005 Author Share Posted December 6, 2005 I took three consecutive images in my messy office. Ready light On for all exposures. All at about 2m from camera. P mode. About 50mm focal length. Here is the URL...(will try to hot link this) http://members.shaw.ca/ocl4/flash3.jpg<div></div> Link to comment Share on other sites More sharing options...
michael_hohner Posted December 7, 2005 Share Posted December 7, 2005 Considering that you had the same problem with two different flashes, the problem may also be the camera. Link to comment Share on other sites More sharing options...
clives Posted December 7, 2005 Author Share Posted December 7, 2005 Thanks for your interest. Apparently there is a history of some firmware/chip fault. I've a letter into KM international and to the Canadian KM agent. What is strange. I don't do much flash work, but took about 80 flash pictures at a social event last month (100-mm, f2.8 lens) with the second flash and they were all (90 percent) pretty good. Now the results are erratic. The camera in all other respects works flawlessly and I've taken 9,600 images in 14 weeks. Link to comment Share on other sites More sharing options...
clives Posted December 7, 2005 Author Share Posted December 7, 2005 I am told by the KM service agent in Canada that the 7D and flash have to be returned for an adjustment of some sort--presumably a "firmware" upgrade. Most unfortunate and I will not do this until early 2006. If anyone else has relevant information, please feel free to post. Thanks. Clive Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now