clark_roberts Posted June 9, 2016 Share Posted June 9, 2016 <p>Hi all,<br> Well I purchased a friends Hasselblad 500CM and so far it's working good but after using it a few times <br> some things came up like the film back being a bit loose. I watched a few video's and did a little reading and <br> took the plunge today and took it apart, first thing I notice was the two screws that hold the latch on was <br> loose so I tighten those and that went well, next I saw on the top of the chassis there are two screw that<br> hold the back panel on and for some reason they were loose and sticking up and I hope I did the right<br> thing by tightening them back down hopefully to no ill effect. I put it all back together and the film back<br> goes on great with no shifting or looseness. Any advice about this would be great, even the screw that<br> holds the assembly on for the advance crank was loose as well so I'm glad I help it a little.</p> <p>Thanks <br> Clark <br> </p> Link to comment Share on other sites More sharing options...
clark_roberts Posted June 21, 2016 Author Share Posted June 21, 2016 <p>I just received my roll back and they look great!</p> Link to comment Share on other sites More sharing options...
stewart_s Posted June 22, 2016 Share Posted June 22, 2016 Congratulations and welcome to Hasselblad ownership. Link to comment Share on other sites More sharing options...
clark_roberts Posted July 9, 2016 Author Share Posted July 9, 2016 <p>Thanks Stewart, it's great to be here.</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now