Hasselblad CF 80mm f2.8 lens Help!

[clark_roberts]

<p>Hi all<br>

I was able to purchased a CF 80mm f2.8 lens at a great price, but it has one issue the lens will not <br>

stay open when the shutter is cocked, when I got the lens the linkage that you turn to cock the shutter<br>

was out of the lens so I removed the rear mount and put it back in and I could see when you turn it<br>

where it should go into the groove and stay there but it spins, does anyone have a photo or diagram<br>

how to set it so it stays. It a great lens and want to fix it if I can.<br>

Thanks <br>

Clark</p>

 

[nathan_wong1]

<p>Yikes. If I were you I'd just bring it to a local camera repair place and have them fix the lens. Might as well get a CLA while it's there too. </p>

[clark_roberts]

<p>Thanks, I put a small spring on the fork linkage and to my surprise the lens works so all I need<br>

is the part number for the spring. the only other problem and I think it's because it's the wrong<br>

spring is the lens goes on easy enough but it's hard to get it off something sticking in one spot.<br>

Thanks <br>

Clark</p>

 

[clark_roberts]

<p>If anybody could help the part is called "spring for intermediate cocking" part number <br>

000000-1008-960 or other for the CF lens.</p>

[clark_roberts]

<p>Found! spring is all I needed?</p>