The SB-28 Has A Modeling Light Too.

[k_michael]

I just purchased and SB 80DX. I was going to purchase the wireless

TTL slave but felt I was better off just buying a complete flash with

a built in TTL slave. The Sb 80 has a button that activates the stobe

in a continous flash taht is considered a modeling light.

I've been doing this for years with my SB-28. All you have to do it

place the 28 into the M stobotic flash mode at 24-50hz at 1/64 power

setting, hit the test button and then adjust your flash for your

desired shadow location.