caleb_gonzalez Posted March 13, 2012 Share Posted March 13, 2012 <p>Hi,<br> I just got an Eye-Fi card. I find the software and config a bit awkward. Even more with the lack of documentation but finally managed to understand. I intend to shoot RAW on the 1st card and JPG Low on the Eye-Fi card. It seems to work fine so far.<br> My only concern now is that it fits a bit tight in my 2nd card slot (on a D7000). If I push the card, it won't come out as a regular card. I have to pull it manually and use a little bit of force.<br> I'm concerned that it could damage the slot. What are your thoughts and experience?<br> Thank you all.<br> klv.</p> Link to comment Share on other sites More sharing options...
szrimaging Posted March 13, 2012 Share Posted March 13, 2012 <p>Don't have an eye-fi, but, does it fit better in slot 1? You should be able to reverse the roles of slot 1 and two then have it in slot 1. Just a thought.</p> Link to comment Share on other sites More sharing options...
chris_lindsey Posted March 13, 2012 Share Posted March 13, 2012 <p>I have have had mine for nine or so months. Works very well with my I-Pad 2. It fits fine in and out of the card slot fine. But just check your's isn't catching on the card's slide lock. If it is, it will go in and out with some resistance and once the slide is in the lock position the camera will not read it but give a "Err" message in the photo count window until you slide it open. Learned by trial and error....</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now