Jump to content

600mm APO-Ronar vs 600mm APO-Germinar...but wait, there is more


light-zone

Recommended Posts

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

The battery required for the electronic shutters is available in many regular camera stores here in Germany. And if they are not readily available where you live, there is a trick of combining 2 smaller batteries, that when combined, work fine. Which 2 batteries they are, I cannot remember, but if someone needs the info, I can dig it up for them.
Link to comment
Share on other sites

Well whaddaya know, there is 600mm/9 Ronar in a #5 shutter for sale on eBay. I shameless stole the picture.

<P>

The description is in German. Here it is:

<PRE>

Serien-Nr. 10394681. Sehr guter Zustand. 2 Schutzkappen. Cambo Objektivplatte.

Rarität, wird nicht mehr gebaut.

Neuwert 1992: 2.000 �

</PRE><div>0049u7-10484884.jpg.d1293f662407759ace9480cf6ab480b3.jpg</div>

Link to comment
Share on other sites

Bob,

 

both 5 FS shutter and Control box with cable are available on the used items market. I use them and am very satisfied. Because of the large and mechanically strong front and rear threads of the shutter I am using the shutter to front mount long lenses (750/890/1000) and to mount via an adapter the front and rear cells of the 1000 and 1200 mm Apo Ronars. Although discontinued for a while this shutter is built to last.

 

These shutters when new were not amongst the cheap ones, and I am happy they appear on the market from time to time.

 

Best

 

Joerg

Link to comment
Share on other sites

"800mm F9 Apo Ronar-S with a footnote that the S is for a Apo-Ronar in

Shutter"

 

Not according to Rodenstock.

 

The 520mm and 650mm Apo Ronar S lenses were developed to make direct

offset plates at f16.

 

Nothing to do with a shutter. However a dealer catalog somewhere may have

used an S to indicate that it a lens was in shutter.

 

There was also an Apo Ronar M that was for printed circuit board

manufacturing.

 

As for the Compur Electronic 5 shutters the mounting threads are 85mm. The

600mm Apo Ronar has a 110mm screw thread on it's mount so an adapter

will make it slower then f9. The 1000mm f14 had a 120mm thread and the f16

had a 135mm thread mount.

 

The control unit uses 6 C cells to power it or an optional AC adapter. The

adapter was made in 220V only and was available in 110V on special order

only. The cables were available in 1.5m, 4m and 10m and extensions in 4

and 10m.

 

This shutter has not been available for at least 2 decades.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...